MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   80 mm cobra to a 5.0 mustang (http://forums.mustangworks.com/showthread.php?t=37197)

84gt347 06-13-2003 12:05 PM

80 mm cobra to a 5.0 mustang
 
Bought the 80mm cobra meter to use with some 42# injectors and the plug from the car is not compatable with the meter. I ordered a plug for a cobra to solder in place of the 5.0 plug but there are 6 wires instead of 4?/?? How do i breed these two together

Coupe50h 06-14-2003 03:48 AM

maybe its because that maf is not compatible with a 5.0.
even if it is, that is WAAAAAY too big, even if you are supercharged.

HiFlow5 0 06-15-2003 06:11 PM

I also believe the stock computer won't allow for that size meter.

84gt347 06-16-2003 11:37 AM

i'm following the recommendation's put out by kenne bells tech dept. they burned a chip for this application, they say> Sometimes they frustrate me.


All times are GMT -5. The time now is 08:20 AM.