??? on combo

lx mike · 11-20-2001, 07:51 AM

i just picked up a cobra intake and also a 65 mm T.B for under $300 for both, i know where i can get an f-cam for around $100 but i'm not sure about putting a cam in with stock heads. i am thinking that the intake and t.b will help a little now and then later when i do the heads will be good time for a cam too and i will have a good setup then, any thoughts??

riceboyskiller · 11-20-2001, 08:30 AM

If you really want to hate your stang,put the f303 in.It will sound really cool but all the grunt torque you have now gonna be everwhere except hunder your hood.

Try the stock one or a slightly bigger one

Stang Runner · 11-20-2001, 09:58 AM

The sock cam realy works good with the Stock heads has it is. If you are going to get new heads Or port the stock ones A new cam Will help out.

Dangerous Dave · 11-20-2001, 11:29 AM

I wouldn't waste time and money on gaskets for the intake either if the heads are stock-AND, you plan on changing them later. The intake wont give you much at all with the bottle neck heads. Bolt on the 65TB and wait for the rest until you get new heads or port your stock ones. Not sure what your shooting for but you can run 12's on a stock intake, heads, and cam with a 65TB and other regular bolt-ons.

11-20-2001, 07:51 AM	#1
lx mike Undescribable Join Date: Sep 1998 Location: Ft Myers Fla Posts: 1,539	??? on combo i just picked up a cobra intake and also a 65 mm T.B for under $300 for both, i know where i can get an f-cam for around $100 but i'm not sure about putting a cam in with stock heads. i am thinking that the intake and t.b will help a little now and then later when i do the heads will be good time for a cam too and i will have a good setup then, any thoughts?? __________________ Rice Haters Club Member #101

11-20-2001, 08:30 AM	#2
riceboyskiller Registered Member Join Date: Sep 2001 Location: sherbrooke,quebec,canada Posts: 46	If you really want to hate your stang,put the f303 in.It will sound really cool but all the grunt torque you have now gonna be everwhere except hunder your hood. Try the stock one or a slightly bigger one __________________ 92 black LX

11-20-2001, 09:58 AM	#3
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	The sock cam realy works good with the Stock heads has it is. If you are going to get new heads Or port the stock ones A new cam Will help out. __________________ Engine: steel mounts, Under drive pulleys, K&N, GT-40 Intake ported Lower, No power steering, No A/C, Mac cold intake, 65MM TB, 255 Fuel pump, 24's, AFR 165 58cc, Rocker Arms 1.7with the stock Cam, 1 5/8 short headers, offRoad X-pipe Drive Train: 3.55, T-5 with a Pro 5.0 shifter 12.656@107.71MPH See It at www.T-racing.com/mustang.htm

11-20-2001, 11:29 AM	#4
Dangerous Dave Registered Member Join Date: Sep 1999 Location: Minneapolis, MN Posts: 121	I wouldn't waste time and money on gaskets for the intake either if the heads are stock-AND, you plan on changing them later. The intake wont give you much at all with the bottle neck heads. Bolt on the 65TB and wait for the rest until you get new heads or port your stock ones. Not sure what your shooting for but you can run 12's on a stock intake, heads, and cam with a 65TB and other regular bolt-ons. __________________ 1984 Mustang 1997 Miata

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Thoughts on Combo?	Rosco	Windsor Power	9	06-03-2004 06:07 PM
Anyone here run a similar combo and if so, what times did it run?	slowfive0	Power Adders	3	02-02-2004 01:39 AM
Carb Combo	86GT	Windsor Power	8	08-24-2002 07:23 PM
Bad @ss 351w combo. need help	BowTie Eater 5 Liter	Stang Stories	2	02-28-2001 02:04 PM
BAD @SS N/A 351w Combo? (Long)	BowTie Eater 5 Liter	Windsor Power	0	02-27-2001 10:47 PM