Bolt on Performance Advice

aurilius_maximus · 10-28-2000, 12:58 AM

I am the owner of a 96 Ford Mustang Cobra, it has 22,000 miles on it, and is bone stock. I am looking for advice, or reccomendations, on the best performance bolt on's for the buck. I just got burned by a new Camaro Z28, and would like to remedy this situation. Any advice or reccomendations would be greatly appreciated.

cobrayankee · 10-28-2000, 09:08 AM

4.10 gears, drag radials, K+N filter with silencer removed, and aftermarket exhaust. That is a very good start. Everything in parts will cost you about $825 new, $575 used. Good luck!!

------------------
1997 Cobra (Black on black), C+L 80mm MAF, K+N filter, Pro 5.0 shifter, BBK Springs, Taylor Wires, 2 Chamber Flows, ASP Pulleys, BBK off road H pipe.

SMOKE · 10-28-2000, 11:50 PM

Good suggestions but I'd always say ... SAVE your $$$$ and ........
Buy a Blower

Then you will definately put GM in the rear view.

91LX2Bfast · 10-29-2000, 10:08 AM

You have to give us a price range. You can go from mild to wild.

cobrayankee · 10-29-2000, 11:23 AM

Oh, well if $$ is no object, then definitely a blower. No arguement there. But if it is, need to go with the basics.

10-28-2000, 12:58 AM	#1
aurilius_maximus Registered Member Join Date: Oct 2000 Location: Mt. Shasta, California, 96067 Posts: 77	Bolt on Performance Advice I am the owner of a 96 Ford Mustang Cobra, it has 22,000 miles on it, and is bone stock. I am looking for advice, or reccomendations, on the best performance bolt on's for the buck. I just got burned by a new Camaro Z28, and would like to remedy this situation. Any advice or reccomendations would be greatly appreciated.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Advice about a 331 with forced induction	3MTA3	Windsor Power	4	09-10-2004 09:06 AM
Performance Chip Advice	Orange97GTVert	Modular Madness	17	02-22-2004 08:17 PM
Problem, Bolt Removal	KrivoK	Classic Mustangs	2	12-19-2003 07:26 AM
Advice on injectors...PKRWUD I'd like your advice on this one as well	silver_pilate	Windsor Power	3	06-09-2003 08:59 AM
Performance Bolt ons	snipe	Classic Mustangs	6	11-11-2000 03:04 AM

10-28-2000, 09:08 AM	#2
cobrayankee Registered Member Join Date: Jul 2000 Location: Baltimore, MD Posts: 516	4.10 gears, drag radials, K+N filter with silencer removed, and aftermarket exhaust. That is a very good start. Everything in parts will cost you about $825 new, $575 used. Good luck!! ------------------ 1997 Cobra (Black on black), C+L 80mm MAF, K+N filter, Pro 5.0 shifter, BBK Springs, Taylor Wires, 2 Chamber Flows, ASP Pulleys, BBK off road H pipe.

10-28-2000, 11:50 PM	#3
SMOKE Old School ROUSH Join Date: Nov 1999 Location: Stockbridge, GA Posts: 531	Good suggestions but I'd always say ... SAVE your $$$$ and ........ Buy a Blower Then you will definately put GM in the rear view.

10-29-2000, 10:08 AM	#4
91LX2Bfast Registered Member Join Date: Dec 1999 Location: Warrington, PA Posts: 694	You have to give us a price range. You can go from mild to wild.

10-29-2000, 11:23 AM	#5
cobrayankee Registered Member Join Date: Jul 2000 Location: Baltimore, MD Posts: 516	Oh, well if $$ is no object, then definitely a blower. No arguement there. But if it is, need to go with the basics.