MustangWorks.com : Ford Forums - View Single Post

miskae · 02-08-2002, 01:27 PM

The truck motor is a 1995 - roller cam/rockers. I do not know if the motor was on an auto or 5spd? Remove pilot bearing? I do not know what this is or what to look for. I will be pulling the motor back out on Sat and will put the 2 motors side by side and look at the back of each crank.

Any other thoughts out there? Is there a trick to getting the converter on far enough?

thanks

02-08-2002, 01:27 PM	#3
miskae Registered Member Join Date: Feb 2000 Location: Kihei, Maui, Hawaii Posts: 7	More details re truck motor The truck motor is a 1995 - roller cam/rockers. I do not know if the motor was on an auto or 5spd? Remove pilot bearing? I do not know what this is or what to look for. I will be pulling the motor back out on Sat and will put the 2 motors side by side and look at the back of each crank. Any other thoughts out there? Is there a trick to getting the converter on far enough? thanks Last edited by miskae; 02-09-2002 at 12:53 PM..