MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   92' 5.0 Won't start, (http://forums.mustangworks.com/showthread.php?t=1316)

dv.sims 03-01-2001 11:27 PM

92' 5.0 Won't start,
 
Will start up, run 15 sec, shut down and won't restart, wait 5 min and will so same thing. Ran codes, showed 6-6(MAF), any other ideas? Do I replace or look elsewhere?

Capri306 03-02-2001 12:51 AM

Sounds like a bad MAF to me, too. Replace it. Good luck. http://www.mustangworks.com/interact...oard/smile.gif

------------------
Capri306, Moderator, The Mustang Works Online
1979 Mercury Capri, 5.0L -- C4 -- 2.73
1987 Mustang LX Notch http://smilecwm.tripod.com/net3/wink2.gif

rbatson 03-02-2001 12:54 AM

Do you know anyone else with that model mustang? Borrow their MAF, its easy to switch out. See if it works with a different maf, if so then I'm sure you can get one cheap from someone on here... heck I might still have my stock unit.

mustang17 03-02-2001 01:07 AM

You got any mustang friends in the area?

That way you can try their MAF before buying a new one.

When my MAF failed I couldn't rev the car past 4000rpm while driving, but it would stay running. Very odd. At first I thought(with some helpers at mustangworks)that it was the fuel pump, but the MAF code came up, so I tried my buddies and that was it. I was glad to get rid of that stock unit anyway.

Good Luck and let us know how it turns out.

------------------
1995 GT Black sleeper
Edelbrock 6037 heads,Edelbrock proformer intake,Edelbrock cam, 70mm TB,75mm pro-m mass air,Taylor wires, Underdrive pulleys,Equal length headers,K&N filter
Flowmaster cat-back, Eibach pro rate springs
lower control arms
3.73 gear Centerforce clutch


mustang17 03-02-2001 01:09 AM

ahhhhh! He beat me to it. See what happens when you go to make food http://www.mustangworks.com/interact...rd/biggrin.gif


All times are GMT -5. The time now is 09:13 AM.