94 cobra question??

acidangel316 · 09-16-2001, 12:41 AM

i recently bought a pretty much stock 94 cobra... does anyone know what size the stock tb and maf are? and, do i have to buy a tb especially for my year or will any 5.0 one work? does anyone know any good websites with stock techincal info on my car??

thanks, j

Casper5.0 · 09-16-2001, 02:19 AM

The throttle body is a 60 mm, i'm not sure of the MAF size. You have to buy a TB for 94-95 GT because of the EGR being on the intake in the 94-95 models. Good luck on the car, I LOVE MINE!!!

------------------
94 cobra, steeda tri-ax, ultra flo's

14.2 @ 99 (stock)

bdhollie · 09-16-2001, 03:14 PM

the MAF is 70mm I believe, I used a C&L from a 93 and it worked fine, just use the elctronics off the top of your stock meter & make sure the C&L has the right sample tube for your injectors, they also make a specific on for 94-95 that has a larger flange to adapt directly to you inlet tube. I would probably go with that being you are mostly stock, and for gods sake get a K&N!!!

StoplightWarrior · 09-16-2001, 05:49 PM

On my 94 snake, the throttle body specifically says: "65mm." On it. I don't think it is aftermarket.

------------------
Black 2000 GT Auto
Bassani X-pipe, Magnaflow Mufflers, Steeda Pulleys, K&N Filter. Steeda Weld in Subframes, Strut Tower brace, Sport Springs, Caster/Camber Plates.
Ran Once, 14.52@96.57 with a 1.32 R/T!!!

Red 1994 Mustang Cobra #4343
Pulleys, Shorty Headers, K&N filter, short throw shifter.

Unit 5302 · 09-16-2001, 11:40 PM

I have been jumped on numerous times about saying the stock 1994-1995 Cobra's came with 65mm TB's. 1994-1995 appearently came stock with 60mm units. You'll need to get a T/B for 1994-1995 5.0s, if you want one. I doubt it'll do much for you. Get rid of the Cobra cam first.

Only the 1993 Cobra had a 65mm T/B.

The stock Cobra MAF is 73mm.

09-16-2001, 12:41 AM	#1
acidangel316 Registered Member Join Date: Jun 2001 Posts: 27	94 cobra question?? i recently bought a pretty much stock 94 cobra... does anyone know what size the stock tb and maf are? and, do i have to buy a tb especially for my year or will any 5.0 one work? does anyone know any good websites with stock techincal info on my car?? thanks, j

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Acura Cl-S says he beat a cobra?	Coupe5oh	Stang Stories	11	07-29-2002 04:27 PM
Exhaust question on '98 Cobra	blueneonman1	Windsor Power	0	08-09-2001 03:04 AM
94-95 Cobra intake question	redsn95vert	Windsor Power	1	04-16-2001 06:49 AM
93 CobrA Question	mike5p01	Windsor Power	1	04-15-2001 08:46 PM
93 cobra question??	90dpscoupe	Windsor Power	4	01-15-2001 04:27 AM

09-16-2001, 02:19 AM	#2
Casper5.0 Registered Member Join Date: Jun 2000 Location: Stillwater, OK Posts: 107	The throttle body is a 60 mm, i'm not sure of the MAF size. You have to buy a TB for 94-95 GT because of the EGR being on the intake in the 94-95 models. Good luck on the car, I LOVE MINE!!! ------------------ 94 cobra, steeda tri-ax, ultra flo's 14.2 @ 99 (stock)

09-16-2001, 03:14 PM	#3
bdhollie Registered Member Join Date: Feb 2001 Location: Tulsa,OK Posts: 8	the MAF is 70mm I believe, I used a C&L from a 93 and it worked fine, just use the elctronics off the top of your stock meter & make sure the C&L has the right sample tube for your injectors, they also make a specific on for 94-95 that has a larger flange to adapt directly to you inlet tube. I would probably go with that being you are mostly stock, and for gods sake get a K&N!!!

09-16-2001, 05:49 PM	#4
StoplightWarrior Registered Member Join Date: Jun 2000 Location: Nor-Cal Posts: 1,311	On my 94 snake, the throttle body specifically says: "65mm." On it. I don't think it is aftermarket. ------------------ Black 2000 GT Auto Bassani X-pipe, Magnaflow Mufflers, Steeda Pulleys, K&N Filter. Steeda Weld in Subframes, Strut Tower brace, Sport Springs, Caster/Camber Plates. Ran Once, 14.52@96.57 with a 1.32 R/T!!! Red 1994 Mustang Cobra #4343 Pulleys, Shorty Headers, K&N filter, short throw shifter.

09-16-2001, 11:40 PM	#5
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,246	I have been jumped on numerous times about saying the stock 1994-1995 Cobra's came with 65mm TB's. 1994-1995 appearently came stock with 60mm units. You'll need to get a T/B for 1994-1995 5.0s, if you want one. I doubt it'll do much for you. Get rid of the Cobra cam first. Only the 1993 Cobra had a 65mm T/B. The stock Cobra MAF is 73mm.