87-93 LX tailpipes on a 93GT

Stang_ROTY · 07-02-2001, 01:19 AM

I've seen it done before. I think all you have to do is take the hangers off the LX tailpipes and weld them onto the GT's, right? Has anyone done this before?

07-02-2001, 02:04 AM

Usually it'll look kinda odd with the stock GT rear bumper cover, but if you order a '93 Cobra rear bumper cover it comes with provisions to add the LX pipes so it looks alot cleaner and less cramped.

------------------
'84 Mustang 5.0 LX
My car

White GT · 07-10-2001, 09:56 PM

You can also put an extra 18" pipe at very low price 20$ each + 20$ for install. For now the look is much better. Here's some picture of mine with this config. My project is to get 1993 cobra bumper cover. For now it's just a money problem

I know. This car need a paint job too

------------------

88 GT, K&N, Home Made Ram Air, Convertible Engine Mount, Dynomax Super Turbo, 180° thermostat, Energy sway bar bushings, Strut tower brace.
*** And Risen from the dead ***

My GT

My Web Page

StreetStang37 · 07-11-2001, 12:21 AM

Personally, in my OPINION, I don't think it looks right, looks like your trying to forcefully add something that's not supposed to be there. This is not a flame, I have LX tail lights and some prefer the GT ones, to each his own.

------------------
1993 Mustang GT - March Ram Air & Pullies, K&N, C&L 73mm MAF, 3.73 Gears, Super Competition Hooker Headers, 2 1/2 in. High Flow H-Pipe & Cat Back, Pro 5.0 Shifter, 16* Timing Advance, 8.5mm MSD Super Cunductor Plug Wires, Romoved front Sway Bar, Pro-Shift Lite, LX lights

07-02-2001, 01:19 AM	#1
Stang_ROTY Registered Member Join Date: Feb 2001 Location: Berkshire County - Massachusetts Posts: 735	87-93 LX tailpipes on a 93GT I've seen it done before. I think all you have to do is take the hangers off the LX tailpipes and weld them onto the GT's, right? Has anyone done this before?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Differences: GT v LX	FiveORookie	Windsor Power	6	10-11-2002 09:43 AM
lx trunk lid???	19907up	Windsor Power	1	08-06-2002 02:45 PM
LX tailpipes on a GT? How?	88COBRA	Windsor Power	5	04-12-2001 11:12 AM
sedanman vs 11sec LX	sedanman	Stang Stories	3	03-16-2001 12:53 AM
LX 5.0 goes down, followed by Accord? hehe	Unit 5302	Stang Stories	8	02-22-2001 06:16 PM

07-02-2001, 02:04 AM	#2
84stangLX Guest Posts: n/a	Usually it'll look kinda odd with the stock GT rear bumper cover, but if you order a '93 Cobra rear bumper cover it comes with provisions to add the LX pipes so it looks alot cleaner and less cramped. ------------------ '84 Mustang 5.0 LX My car

07-10-2001, 09:56 PM	#3
White GT Registered Member Join Date: Nov 1999 Location: At the north of the Maine Posts: 177	You can also put an extra 18" pipe at very low price 20$ each + 20$ for install. For now the look is much better. Here's some picture of mine with this config. My project is to get 1993 cobra bumper cover. For now it's just a money problem I know. This car need a paint job too ------------------ 88 GT, K&N, Home Made Ram Air, Convertible Engine Mount, Dynomax Super Turbo, 180° thermostat, Energy sway bar bushings, Strut tower brace. * And Risen from the dead * My GT My Web Page

07-11-2001, 12:21 AM	#4
StreetStang37 Registered Member Join Date: Dec 2000 Location: San Jose, California USA Posts: 275	Personally, in my OPINION, I don't think it looks right, looks like your trying to forcefully add something that's not supposed to be there. This is not a flame, I have LX tail lights and some prefer the GT ones, to each his own. ------------------ 1993 Mustang GT - March Ram Air & Pullies, K&N, C&L 73mm MAF, 3.73 Gears, Super Competition Hooker Headers, 2 1/2 in. High Flow H-Pipe & Cat Back, Pro 5.0 Shifter, 16* Timing Advance, 8.5mm MSD Super Cunductor Plug Wires, Romoved front Sway Bar, Pro-Shift Lite, LX lights