MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   A9P computer?? hurting performance?? (http://forums.mustangworks.com/showthread.php?t=4750)

Smokedawg 07-26-2001 09:13 AM

A9P computer?? hurting performance??
 
Awhile back a buddy and I installed a A9P computer in my car to see what it would do. We didnt notice much but maybe a bit higher rev. Well, I have now added about every one of my mods in my sig. and am wanting to know if this computer can be hurting my performance in any way. Really wanting to make sure its not a Speed Density computer. Thanks for any advice....

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

TM88GT 07-26-2001 11:10 AM

Don't worry it's not a speed-density EEC. The A9P is the EEC out of 89-92 Mustangs (5.0) equipped with automatic trannies. To be honest with you, your heads/intake/cam combination is way too small for the increased cubes of the 347. That heads/cam/intake is small for a 302. Your car is probably making in the 270-290rwhp range, with a boat load of torque (340-350 ft/lbs). You need bigger heads (AFR 185 or stage II TW's), better flowing intake (Holley is second to none) and more cam. Then, and only then will you see the benefits of the 347.

------------------
TM88GT

Smokedawg 07-26-2001 11:59 AM

I am in the process of saving up for a new intake. I was planning on the edelbrock..I was then going to purchase a custom ground cam.

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC and Smog del, rear seat del.

Unit 5302 07-26-2001 06:14 PM

The A9P is just about if not the most aggressive Ford computer you can get. No, it's not hurting performance.


All times are GMT -5. The time now is 11:42 AM.