For you people in Pittsburgh PA area

Ares · 02-08-2001, 06:27 PM

Found a place that has has MD250 Dyno, ATI dealer, plus service. I figured that anyone in area would like to know this. I never knew they existed and being only 15 minutes from my house, figures heh. I will be having some work done and car dynoed here shortly.

ASAP Auto service and Performance
Allison Park, PA.
(412)492-7454

asapmust@stargate.net

------------------
2000 GT Laser red-5speed
MAC Cold-air Induction
MAC 2 1/2" cat back exhuast
275/50-15 Drag T/A's used at track
Best Quarter mile run to date: 13.50@99.97 (1.87 60')

98yellow stang · 02-08-2001, 08:01 PM

Hey thanks man. Any idea how much for a dyno run? Sounds good I am from Latrobe but I go to school in erie. Do you belong to that MCA chapter from pittsburg?

Cool beans
Light em up
Jason

------------------
My 98 yellow stang

Mods:
Magnaflow cat-back

Ares · 02-08-2001, 08:19 PM

Umm the current Dyno pricing(Show prices from World of Wheels show good till 2/28) Not sure what regualr pricing is but will post them next time I call ASAP.

$75 2 runs
$25 each additional run
$600 rent dyno for day

They offer special club pricing from what flyer says.

I'm not part of any club, just like to race at Keystone raceway and can find me usually in street or heavy class.

------------------
2000 GT Laser red-5speed
MAC Cold-air Induction
MAC 2 1/2" cat back exhuast
275/50-15 Drag T/A's used at track
Best Quarter mile run to date: 13.50@99.97 (1.87 60')

Killercanary · 02-08-2001, 09:11 PM

Ed is a good guy and he knows his stuff. I had my car dyno'd there 2 weeks after they got it back in August. If you are having your car dyno'd there email me. There is also a chassis dyno in Washington PA off Murtland Avenue so I've heard. There is also a place called Don's performance test and tune on 10020 Meadville AT (RT18), Cranesville. The phone # is (814) 756-3432. They have a 248C Chassis dyno. ASAP has a mustang chassis dyno.

I too frequent Keystone, only on thursdays for test and tune though. Maybe you've seen me. My car is in the readers rides of this board or you can see my car on my web site at http://www.angelfire.com/pa2/killercanary

------------------
95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior
Best ET: 13.83
Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's
Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire.

[This message has been edited by Killercanary (edited 02-08-2001).]

Ares · 02-09-2001, 06:02 PM

I will be seeing Ed at ASAP its only 15 minutes from my house. I also try to avoid Keystone on Test/Tune nights since it ends up being a zoo. I will be there April 1st for the first test/tune to help get use to car after mods.

------------------
2000 GT Laser red-5speed
MAC Cold-air Induction
MAC 2 1/2" cat back exhuast
275/50-15 Drag T/A's used at track
Best Quarter mile run to date: 13.50@99.97 (1.87 60')

Stang_Crazy · 02-09-2001, 06:11 PM

THANK GOD! I've been wondering where all the performance shops were. Seems like everyone goes to Keystone. I've probably seen a few of you guys up there. Does anyone go to crafton for the street races??

------------------
91 GT AOD
Ultra Blue Metallic
3.73's, flows,
PI Converter, 14.71@91.78mph
2.11 60'

Killercanary · 02-09-2001, 07:07 PM

I was the very first car to make a pass last year on the first day it was open. It does tend to be a zoo- that's why i always get there early and always take lane 1 or 2, that way I get through all the congestion at the back and don't end up being skipped over.

I've heard about the races in crafton for a few years, but I never went. I just recently found out exactly where they are as I just got a job out near robinson town center and I went to eat at Pirmantti's (sp) and the guy I was with said they race just down the road from there near UPS. Do they have them year round or just in the summer? I was always worried about getting nailed by the cops just for watching.

I highly recommend to anyone that can make it to attend the TCTC mustang club's track day. Last year it was on August 19th. They rented the track all day on a saturday, it cost around $45 a person/car. I made 13 passes, but I could have made at least 20 if I didn't want my car to cool. It was the best time I have ever had at the track. It is a 1000X's better than thursday's test and tune.
BTW- what is the website for ASAP by Ed's shop? The link above doesn't work.

------------------
95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior
Best ET: 13.83
Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's
Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire.

Ares · 02-09-2001, 09:48 PM

Hmm dont know if they have a website only the email on flyer I have. As for street racing nope never done it or would bother to.

I know your pain Stang_crazy, it is a royal pain in butt to find anyone around here that does good performance work. One thing nice is that when I need parts its nothing but an 1 1/2 drive to Summit.

By the way nice cars guys

------------------
2000 GT Laser red-5speed
MAC Cold-air Induction
MAC 2 1/2" cat back exhuast
275/50-15 Drag T/A's used at track
Best Quarter mile run to date: 13.50@99.97 (1.87 60')

[This message has been edited by Ares (edited 02-09-2001).]

Killercanary · 02-10-2001, 02:12 AM

Thanks, I'm assuming you looked at my website as well as the other listed above. I started doing business with Chris who had a shop called EZ racing near keystone, but he went to florida and the store has been closed since. He met or beat every price I found in magazines, he was really helpful as well. I hope he comes back, I need to order some new parts!

Mach 1 · 02-10-2001, 07:13 AM

Hey guys, Im from Pittsburgh originally (dont live there now) and I am curious as to where exactly this "keystone raceway" is located? I never heard of it?

------------------
1993 GT/AOD
'93 Mustang GT

Ares · 02-10-2001, 02:47 PM

REALLY!!

It's about 20-25 minuntes from Monroeville on Route 22 East, just outside New Alexandria(Track on east bound side top of hill on flats). It's one of the oldest tracks in country.

Stang_Crazy · 02-10-2001, 03:27 PM

Yea, Keystone is not exactly the best of tracks but it does just fine for most of us. It takes about 40 min for me to get there from the city although you can usually fly on the way up. We'll all have to meet up sometime this summer. Does anyone know when it's going to open up?

------------------
91 GT AOD
Ultra Blue Metallic
3.73's, flows,
PI Converter, 14.71@91.78mph
2.11 60'

Mach 1 · 02-10-2001, 04:12 PM

Thanks. I thought it was in that area. Have to get back to the Pens game on the satelite...GO PENS!

------------------
1993 GT/AOD
'93 Mustang GT

Killercanary · 02-10-2001, 05:24 PM

Yeh, Keystone is not one of the top tracks in the country, and you must have a good set of brakes to get stopped at the end, but its a good track with good traction- usually. Its elevation is roughly 1100-1250 feet (I was told both). The first test and tune day is April 1st. You can see the schedule at http://www.keystoneraceway.com

It great having Mario back with the Pens- as a player!

02-08-2001, 06:27 PM	#1
Ares Registered Member Join Date: Oct 2000 Location: Saxonburg, PA, USA Posts: 236	For you people in Pittsburgh PA area Found a place that has has MD250 Dyno, ATI dealer, plus service. I figured that anyone in area would like to know this. I never knew they existed and being only 15 minutes from my house, figures heh. I will be having some work done and car dynoed here shortly. ASAP Auto service and Performance Allison Park, PA. (412)492-7454 asapmust@stargate.net ------------------ 2000 GT Laser red-5speed MAC Cold-air Induction MAC 2 1/2" cat back exhuast 275/50-15 Drag T/A's used at track Best Quarter mile run to date: 13.50@99.97 (1.87 60')

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Anybody on this forum from the Tampa FL. area?	what_import	Stang Stories	6	11-26-2004 06:28 PM
Any Racers From the San Jose Area?	caliplaya650	Stang Stories	6	07-25-2001 05:27 AM
Tired of people Chickening out. Race Darnit.	Mercury	Stang Stories	6	04-07-2001 03:39 PM
t-5 rebuild around the Oklahoma/Texas area?	LEYSTANG	Windsor Power	1	01-08-2001 07:33 PM
How many people here are from Dallas?	66fastback	Classic Mustangs	4	05-28-1999 06:36 PM

02-08-2001, 08:01 PM	#2
98yellow stang Registered Member Join Date: Dec 2000 Location: Erie PA USA Posts: 38	Hey thanks man. Any idea how much for a dyno run? Sounds good I am from Latrobe but I go to school in erie. Do you belong to that MCA chapter from pittsburg? Cool beans Light em up Jason ------------------ My 98 yellow stang Mods: Magnaflow cat-back

02-08-2001, 08:19 PM	#3
Ares Registered Member Join Date: Oct 2000 Location: Saxonburg, PA, USA Posts: 236	Umm the current Dyno pricing(Show prices from World of Wheels show good till 2/28) Not sure what regualr pricing is but will post them next time I call ASAP. $75 2 runs $25 each additional run $600 rent dyno for day They offer special club pricing from what flyer says. I'm not part of any club, just like to race at Keystone raceway and can find me usually in street or heavy class. ------------------ 2000 GT Laser red-5speed MAC Cold-air Induction MAC 2 1/2" cat back exhuast 275/50-15 Drag T/A's used at track Best Quarter mile run to date: 13.50@99.97 (1.87 60')

02-08-2001, 09:11 PM	#4
Killercanary Registered Member Join Date: Nov 1999 Location: Altoona, PA Posts: 336	Ed is a good guy and he knows his stuff. I had my car dyno'd there 2 weeks after they got it back in August. If you are having your car dyno'd there email me. There is also a chassis dyno in Washington PA off Murtland Avenue so I've heard. There is also a place called Don's performance test and tune on 10020 Meadville AT (RT18), Cranesville. The phone # is (814) 756-3432. They have a 248C Chassis dyno. ASAP has a mustang chassis dyno. I too frequent Keystone, only on thursdays for test and tune though. Maybe you've seen me. My car is in the readers rides of this board or you can see my car on my web site at http://www.angelfire.com/pa2/killercanary ------------------ 95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior Best ET: 13.83 Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire. [This message has been edited by Killercanary (edited 02-08-2001).]

02-09-2001, 06:02 PM	#5
Ares Registered Member Join Date: Oct 2000 Location: Saxonburg, PA, USA Posts: 236	I will be seeing Ed at ASAP its only 15 minutes from my house. I also try to avoid Keystone on Test/Tune nights since it ends up being a zoo. I will be there April 1st for the first test/tune to help get use to car after mods. ------------------ 2000 GT Laser red-5speed MAC Cold-air Induction MAC 2 1/2" cat back exhuast 275/50-15 Drag T/A's used at track Best Quarter mile run to date: 13.50@99.97 (1.87 60')

02-09-2001, 06:11 PM	#6
Stang_Crazy It's never clean enough! Join Date: Jan 1999 Location: Shaler, PA Posts: 1,542	THANK GOD! I've been wondering where all the performance shops were. Seems like everyone goes to Keystone. I've probably seen a few of you guys up there. Does anyone go to crafton for the street races?? ------------------ 91 GT AOD Ultra Blue Metallic 3.73's, flows, PI Converter, 14.71@91.78mph 2.11 60'

02-09-2001, 07:07 PM	#7
Killercanary Registered Member Join Date: Nov 1999 Location: Altoona, PA Posts: 336	I was the very first car to make a pass last year on the first day it was open. It does tend to be a zoo- that's why i always get there early and always take lane 1 or 2, that way I get through all the congestion at the back and don't end up being skipped over. I've heard about the races in crafton for a few years, but I never went. I just recently found out exactly where they are as I just got a job out near robinson town center and I went to eat at Pirmantti's (sp) and the guy I was with said they race just down the road from there near UPS. Do they have them year round or just in the summer? I was always worried about getting nailed by the cops just for watching. I highly recommend to anyone that can make it to attend the TCTC mustang club's track day. Last year it was on August 19th. They rented the track all day on a saturday, it cost around $45 a person/car. I made 13 passes, but I could have made at least 20 if I didn't want my car to cool. It was the best time I have ever had at the track. It is a 1000X's better than thursday's test and tune. BTW- what is the website for ASAP by Ed's shop? The link above doesn't work. ------------------ 95 GT convt' 5 speed, 3.73's,FMS HD clutch, Pro 5.0 shifter, ASP alum. underdrive pulleys, Bassani offroad X pipe, 2 chmbr flowmasters, K&N w/o silencer, edelbrock performer intake, FRPP 65mm T-body, FRPP shorty headers, FRPP aluminum driveshaft.Hooker 4pt chrome car bar, Xenon/Wings West ground effects, custom interior Best ET: 13.83 Best MPH: 98.55mph with Best 60': 1.91 on Nitto DR's Homepage: <A HREF="http://www.angelfire.com/pa2/killercanary" TARGET=_blank>http://www.angelfire.

02-09-2001, 09:48 PM	#8
Ares Registered Member Join Date: Oct 2000 Location: Saxonburg, PA, USA Posts: 236	Hmm dont know if they have a website only the email on flyer I have. As for street racing nope never done it or would bother to. I know your pain Stang_crazy, it is a royal pain in butt to find anyone around here that does good performance work. One thing nice is that when I need parts its nothing but an 1 1/2 drive to Summit. By the way nice cars guys ------------------ 2000 GT Laser red-5speed MAC Cold-air Induction MAC 2 1/2" cat back exhuast 275/50-15 Drag T/A's used at track Best Quarter mile run to date: 13.50@99.97 (1.87 60') [This message has been edited by Ares (edited 02-09-2001).]

02-10-2001, 02:12 AM	#9
Killercanary Registered Member Join Date: Nov 1999 Location: Altoona, PA Posts: 336	Thanks, I'm assuming you looked at my website as well as the other listed above. I started doing business with Chris who had a shop called EZ racing near keystone, but he went to florida and the store has been closed since. He met or beat every price I found in magazines, he was really helpful as well. I hope he comes back, I need to order some new parts!

02-10-2001, 07:13 AM	#10
Mach 1 Registered Member Join Date: May 1999 Location: Georgia Posts: 3,866	Hey guys, Im from Pittsburgh originally (dont live there now) and I am curious as to where exactly this "keystone raceway" is located? I never heard of it? ------------------ 1993 GT/AOD '93 Mustang GT

02-10-2001, 02:47 PM	#11
Ares Registered Member Join Date: Oct 2000 Location: Saxonburg, PA, USA Posts: 236	REALLY!! It's about 20-25 minuntes from Monroeville on Route 22 East, just outside New Alexandria(Track on east bound side top of hill on flats). It's one of the oldest tracks in country.

02-10-2001, 03:27 PM	#12
Stang_Crazy It's never clean enough! Join Date: Jan 1999 Location: Shaler, PA Posts: 1,542	Yea, Keystone is not exactly the best of tracks but it does just fine for most of us. It takes about 40 min for me to get there from the city although you can usually fly on the way up. We'll all have to meet up sometime this summer. Does anyone know when it's going to open up? ------------------ 91 GT AOD Ultra Blue Metallic 3.73's, flows, PI Converter, 14.71@91.78mph 2.11 60'

02-10-2001, 04:12 PM	#13
Mach 1 Registered Member Join Date: May 1999 Location: Georgia Posts: 3,866	Thanks. I thought it was in that area. Have to get back to the Pens game on the satelite...GO PENS! ------------------ 1993 GT/AOD '93 Mustang GT

02-10-2001, 05:24 PM	#14
Killercanary Registered Member Join Date: Nov 1999 Location: Altoona, PA Posts: 336	Yeh, Keystone is not one of the top tracks in the country, and you must have a good set of brakes to get stopped at the end, but its a good track with good traction- usually. Its elevation is roughly 1100-1250 feet (I was told both). The first test and tune day is April 1st. You can see the schedule at http://www.keystoneraceway.com It great having Mario back with the Pens- as a player!