Accufab TB questions - Where to buy, what size, etc.

2FastLX · 03-02-2001, 02:33 PM

I am going to order an Accufab TB next week and need to know what size you guys recommend for this setup...
90 LX 5.0 with:
GT-40 intake
76mm MAS with 24lb injectors
Stock E7 heads which will be ported and polished and new hardware installed with upgraded springs to match cam
Mild to moderate cam (still deciding and looking for suggestions)
Roller rockers - ratio depending on cam
Full MAC exhaust with long tubes and a pro chamber off road crossover
Underdrive pullies
Cold air kit
3.73 gears
Electric fan (soon)
MSD 6AL ignition and Blaster coil coming soon as well.

I plan on getting a set of AFR 165 heads this summer, which will be my next purchase after all this stuff, but for now the ported stockers are going to have to do. Would a 70mm be too big for me? Or should I go with a 65mm? I would have to machine the intake to match the 70mm too I think. I plan to add NOS and maybe a Turbo sometime down the road.

And most importantly, where is the best place to buy Accufab TB's?

Rick 91GT · 03-02-2001, 03:40 PM

I think a 65mm would better suit your combo, and since you won't be turning real high rpms where the 70mm would really help and come on.

I bought mine from The Power Source it is a 65mm, It was on the car for 2800 miles and is like new, I paid $270.00 for the TB and spacer. I would like to upgrade to the 70mm so if you make me a deal I can't refuse it your's...I'll pay shipping.

Rick
8-5 M-F (rhawver@strouse.com)
after 5 and weekends (Rick91GT@onemain.com)

------------------
My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98

03-02-2001, 02:33 PM	#1
2FastLX The Photoshop Guru Join Date: Feb 2001 Location: Mecca, Indiana Posts: 1,419	Accufab TB questions - Where to buy, what size, etc. I am going to order an Accufab TB next week and need to know what size you guys recommend for this setup... 90 LX 5.0 with: GT-40 intake 76mm MAS with 24lb injectors Stock E7 heads which will be ported and polished and new hardware installed with upgraded springs to match cam Mild to moderate cam (still deciding and looking for suggestions) Roller rockers - ratio depending on cam Full MAC exhaust with long tubes and a pro chamber off road crossover Underdrive pullies Cold air kit 3.73 gears Electric fan (soon) MSD 6AL ignition and Blaster coil coming soon as well. I plan on getting a set of AFR 165 heads this summer, which will be my next purchase after all this stuff, but for now the ported stockers are going to have to do. Would a 70mm be too big for me? Or should I go with a 65mm? I would have to machine the intake to match the 70mm too I think. I plan to add NOS and maybe a Turbo sometime down the road. And most importantly, where is the best place to buy Accufab TB's?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Tire size question	96Saleen	Modular Madness	6	02-09-2004 03:07 PM
Quick questions on Explorer Intake install.	Falcons Talon	Windsor Power	2	08-21-2003 12:40 PM
wheel size	fordkid68	Stang Stories	0	03-13-2002 07:14 PM
wheel size	fordkid68	Classic Mustangs	0	03-10-2002 03:28 PM
How do I choose the right tire size?!	90LxDroptop	Windsor Power	4	12-27-2001 10:49 PM

03-02-2001, 03:40 PM	#2
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	I think a 65mm would better suit your combo, and since you won't be turning real high rpms where the 70mm would really help and come on. I bought mine from The Power Source it is a 65mm, It was on the car for 2800 miles and is like new, I paid $270.00 for the TB and spacer. I would like to upgrade to the 70mm so if you make me a deal I can't refuse it your's...I'll pay shipping. Rick 8-5 M-F (rhawver@strouse.com) after 5 and weekends (Rick91GT@onemain.com) ------------------ My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98