alignment time

GhettoPop · 02-18-2003, 02:31 AM

Alignment for my 90 GT daily driver:

–.5 to -1 deg camber
zero toe to 1/16th toe-in.
maximum caster (not adjustable with stock plates,
but I should be able to get about +3 degrees with MM's I am buying).

Suggestions?

GhettoPop · 02-19-2003, 10:07 AM

one other quick ques:

negative toe is toe in or out?

srv1 · 02-19-2003, 11:17 AM

toe in is negative. this may help you:alignment

GhettoPop · 02-24-2003, 10:06 AM

Quote:

Originally posted by GhettoPop

For 90GT:
–.5 to -1 deg camber
zero toe to 1/16th toe-in.
maximum caster (not adjustable with stock plates,
but I should be able to get about +3 degrees with MM's I am buying).

I never got any comments on these specs. Was still wondering...is this is a good setup? Thanks.

02-18-2003, 02:31 AM	#1
GhettoPop Gimme a Drink! Join Date: Dec 2002 Location: NYC Posts: 694	alignment time Alignment for my 90 GT daily driver: –.5 to -1 deg camber zero toe to 1/16th toe-in. maximum caster (not adjustable with stock plates, but I should be able to get about +3 degrees with MM's I am buying). Suggestions?

02-19-2003, 11:17 AM	#3
srv1 Get down..... Join Date: Apr 2001 Location: Room 103 Posts: 2,095	toe in is negative. this may help you:alignment __________________ Cobra brakes are on! Finally..... ------------------------------------------------

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My report from racing at the NMRA event in Bowling Green (was ATTN: Lt. Dan)	andy669	Racer's Club House	12	10-08-2003 02:41 PM
Towed away this time! (Long)	1988GTCONERTIBLE	Windsor Power	6	10-26-2001 06:05 PM

02-19-2003, 10:07 AM	#2
GhettoPop Gimme a Drink! Join Date: Dec 2002 Location: NYC Posts: 694	one other quick ques: negative toe is toe in or out?