Alternator

xxrequiemxx · 09-11-2001, 10:43 PM

Yea... I have the stock, 75 amp alternator inmy car. i they put a 1000w amp in my car for subs.... alternator blew out... then i got a new 130amp alternator... i was puttin it in today, and the bracket it rests on wont let me screw both screws... if i screw the bottom on, it feels sturdy.. but i dont know if i can puton the belt with one screw... so if i return it for the 75 amp alternator, and run a capacitor for my subs.. will the not ruin the amp.... or cani leave in the alternator with one bolt.... or can i change the mounting bracket that it rests on... please help me lolol

Unit 5302 · 09-12-2001, 03:16 AM

You need to cut away the webb on the bracket so you can get the top bolt through on the alternator. Get a high speed drill and a metal file/cutting bit.

09-11-2001, 10:43 PM	#1 (permalink)
xxrequiemxx Registered Member Join Date: Sep 2001 Location: SMithtown, NY, US Posts: 5	Alternator Yea... I have the stock, 75 amp alternator inmy car. i they put a 1000w amp in my car for subs.... alternator blew out... then i got a new 130amp alternator... i was puttin it in today, and the bracket it rests on wont let me screw both screws... if i screw the bottom on, it feels sturdy.. but i dont know if i can puton the belt with one screw... so if i return it for the 75 amp alternator, and run a capacitor for my subs.. will the not ruin the amp.... or cani leave in the alternator with one bolt.... or can i change the mounting bracket that it rests on... please help me lolol

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
confused about how alternator brackets mount	82 GT	Windsor Power	5	10-01-2003 03:19 AM
confused about how alternator brackets mount	82 GT	Classic Mustangs	1	09-30-2003 09:12 PM
g2 to g3 alternator swap	bosss50	Windsor Power	0	04-25-2003 06:14 PM
Weee! Alternator fire!	Scappoose	Windsor Power	6	04-06-2002 03:01 AM
Underdrive pulleys	LincoConti87	Windsor Power	16	04-02-2001 11:42 PM

09-12-2001, 03:16 AM	#2 (permalink)
Unit 5302 Registered Member Join Date: May 1999 Posts: 5,235	You need to cut away the webb on the bracket so you can get the top bolt through on the alternator. Get a high speed drill and a metal file/cutting bit.

Sponsored Links