got my motor together,,,, HOLY SH*T

06-26-2001, 09:01 AM

unbelievable..... this thing pulls like a freight train to about 5800 rpm's.. I never imagined the torque would increase that much, (either that or i forgot what it was like).....

Can't wait till i get those gears in....

where can I get a track lok rebuild kit (if that's what i have)?? how much $$?? is it easy to rebuild??

hoping I can do it myself, got an estimate $1,100.00 with a new carrier (forget what brand), bearings, seals and 3:73 gears

------------------
Black,84 GT,ground effects,shorty headers, 'open' dual exh.,302 HO(no pollution control crap),T5,89 ported heads,edelbrock Performer manifold, Edelbrock 2122 cam,600 Holley, high volume oil pump...

4:10's on their way!!!!

06-28-2001, 02:08 AM

man your car sounds pretty cool.
I'm not sure how easy the trac-lok is to rebuilt since i've never done it myself. You have basically a similar engine combo to that i want to build. With your new engine, once you add new gears it should really scream!

------------------
'84 Mustang 5.0 LX
My car

Rick 91GT · 06-28-2001, 07:19 AM

Glad to hear everything worked out for you..yes you do have a trac loc and I think you can get the rebuild kit for almost any parts store. If you are mechanically inclined you could rebuild it yourself, but that would also be the time to add those gears. Get a quote from the shop who is doing your gears, with it all apart anyways it may not cost that much more.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP

redrider · 06-28-2001, 03:33 PM

DUDE

Tell me you're not going to spen $1100 to rebuild your diff. You should go to a true track locker which cost me brand new 280 plus bearings and install cost me $500 if you want a 3.73 ring and pinion that will only cost you another $150 total price $650 brand new!!

------------------
88 GT mass air conversion from 90lx, Cobra Intake(ported/polished lower),Edlebrock Aluminum Heads(ported/polished),24# injectors 70 mm BBK TB, 73mm C&L, Coast High 347 SB, Wolverine custom cam, 150 shot Nitrous, BBK 1 3/4 long tubes, BBK off road H pipe, Dynomax cat back, alum driveshaft w safety loop, Konis,Southside Bars w chromemoly torque boxes,AOD w lentech valve body, B&M MegaShifter, 4.10 with True Track locker, SVO springs, subs, cross drilled rotors,MSD A6 w ign retard, black magic fan

06-26-2001, 09:01 AM	#1
jerryIII Guest Posts: n/a	*got my motor together,,,, HOLY SHT** unbelievable..... this thing pulls like a freight train to about 5800 rpm's.. I never imagined the torque would increase that much, (either that or i forgot what it was like)..... Can't wait till i get those gears in.... where can I get a track lok rebuild kit (if that's what i have)?? how much $$?? is it easy to rebuild?? hoping I can do it myself, got an estimate $1,100.00 with a new carrier (forget what brand), bearings, seals and 3:73 gears ------------------ Black,84 GT,ground effects,shorty headers, 'open' dual exh.,302 HO(no pollution control crap),T5,89 ported heads,edelbrock Performer manifold, Edelbrock 2122 cam,600 Holley, high volume oil pump... 4:10's on their way!!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Holy ****!!!	joe4speed	Blue Oval Lounge	3	02-19-2004 05:29 PM
Holy ****!! This is a fast BMW	Ackbar00	Stang Stories	3	02-07-2004 01:17 AM
BOOM!! Wow holy crap	MidNiteBlu 5.0	Blue Oval Lounge	5	06-28-2002 11:52 PM
Holy Crap saw a 7 sec focus.	69fastback	Stang Stories	9	09-17-2001 10:18 PM
Talk about learning as you go! Holy Cr@p.	LX90Stang	Windsor Power	2	08-27-2001 10:15 AM

06-28-2001, 02:08 AM	#2
84stangLX Guest Posts: n/a	man your car sounds pretty cool. I'm not sure how easy the trac-lok is to rebuilt since i've never done it myself. You have basically a similar engine combo to that i want to build. With your new engine, once you add new gears it should really scream! ------------------ '84 Mustang 5.0 LX My car

06-28-2001, 07:19 AM	#3
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	Glad to hear everything worked out for you..yes you do have a trac loc and I think you can get the rebuild kit for almost any parts store. If you are mechanically inclined you could rebuild it yourself, but that would also be the time to add those gears. Get a quote from the shop who is doing your gears, with it all apart anyways it may not cost that much more. ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! FIRST TIME OUT 12.16@111 WHEELS-UP

06-28-2001, 03:33 PM	#4
redrider Registered Member Join Date: Apr 1999 Location: seffner, Florida, usa Posts: 95	DUDE Tell me you're not going to spen $1100 to rebuild your diff. You should go to a true track locker which cost me brand new 280 plus bearings and install cost me $500 if you want a 3.73 ring and pinion that will only cost you another $150 total price $650 brand new!! ------------------ 88 GT mass air conversion from 90lx, Cobra Intake(ported/polished lower),Edlebrock Aluminum Heads(ported/polished),24# injectors 70 mm BBK TB, 73mm C&L, Coast High 347 SB, Wolverine custom cam, 150 shot Nitrous, BBK 1 3/4 long tubes, BBK off road H pipe, Dynomax cat back, alum driveshaft w safety loop, Konis,Southside Bars w chromemoly torque boxes,AOD w lentech valve body, B&M MegaShifter, 4.10 with True Track locker, SVO springs, subs, cross drilled rotors,MSD A6 w ign retard, black magic fan