because the motor was new doesnt mean you wouldnt need shims, but not all need them.... go to crane cams website to see how to properly adjust them... www.cranecams.com
or you can call them.
by the way, i fixed my problem. i had one of the rockers on the exhaust valves too tight....it wasnt shutting all the way and when the combustion would hit it would smack the valve into the seat....everything is good now!
adam
__________________
90 GT black/ grey leather
ported GT-40 heads w/ 1.7RR, Cobra intake w/ ported lower, 24# injectors, 190LPH pump, 75mm Pro-M MAF, 65mm TB, K&N panel, BBK long tubes, Off road H-pipe, 2 ch. Flowmaster, Black magic fan, Kirban FPR, 180 deg. T-stat, 3.73's, Steeda Tri-Ax, 130 amp alt. Accell 8.8 race wires/cap/rotor, motorcraft plugs, Factory Five suspension, etc etc etc....
http://avbcon12.stangnet.com
|