Sweet looking Conv. Goes Down

sedanman · 03-29-2001, 02:44 PM

I was on my way home from work with my new 255/50/16 BFG DR (yes ezridn I got them today) on and I am headed home and I see a sweet 94-95 yellow drop top polished rims and sweet flowmaster exhaust, It had some tasteful 5.0 Grafics so anyway I get behind him and he hits it I drop to 4th and it takes a second than I am up his @ss so finally we get side by side going like 70 I could go to 3rd but I decide 4th should be enough, he hits it then me and I hold him than I begin to pull bad when I hit the power band atleast two to three cars. What sucks (for him) is his girl was in the car. too.

------------------
1991 Lx sedan 5.0, 5spd, GT-40 Heads, Cobra intake, 73MM mass air, 65mm TB, FPR, 24lb injectors, E303, Headers,off road H-pipe, Flows, K&n , hurst, 3:55's, pullies, etc...
Best ET 13.5 (2.15 60ft)
Best MPH 103.9
On semi-bald street tires
New mods! electric fan, mac upper and lower control arms, HD trac-loc, lakewood 50/50's on back, shift light, centerforce dual friction, and rebuilt heavy duty T5, A/C SP delete

Smokedawg · 03-29-2001, 03:35 PM

Good run..Hopefully I will get to see that car of yours soon. I will prob drive mine this coming up wed. if the weather is nice enough. Get ahold of me if you want to meet up.

------------------
347 Stroker Motor: Balanced, A9P Computer, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, Holley Fuel Regulator, March Underdrive Pulleys, Electric Fan, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 79mm Mass Air Unit, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, High Tolerant Painted Calipers and Drums.

sedanman · 03-29-2001, 11:48 PM

Smokedawg we are going to the south side steak and shake in indy (on madison ave). We will get there about 10:00 on sat. Ezridn will be there too. Along with a few guys from the corvette forum.

03-29-2001, 02:44 PM	#1
sedanman Registered Member Join Date: Feb 1999 Location: Indianapolis, IN Posts: 963	Sweet looking Conv. Goes Down I was on my way home from work with my new 255/50/16 BFG DR (yes ezridn I got them today) on and I am headed home and I see a sweet 94-95 yellow drop top polished rims and sweet flowmaster exhaust, It had some tasteful 5.0 Grafics so anyway I get behind him and he hits it I drop to 4th and it takes a second than I am up his @ss so finally we get side by side going like 70 I could go to 3rd but I decide 4th should be enough, he hits it then me and I hold him than I begin to pull bad when I hit the power band atleast two to three cars. What sucks (for him) is his girl was in the car. too. ------------------ 1991 Lx sedan 5.0, 5spd, GT-40 Heads, Cobra intake, 73MM mass air, 65mm TB, FPR, 24lb injectors, E303, Headers,off road H-pipe, Flows, K&n , hurst, 3:55's, pullies, etc... Best ET 13.5 (2.15 60ft) Best MPH 103.9 On semi-bald street tires New mods! electric fan, mac upper and lower control arms, HD trac-loc, lakewood 50/50's on back, shift light, centerforce dual friction, and rebuilt heavy duty T5, A/C SP delete

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EZRIDN Vs. '01 GT Conv.	EZRIDN	Stang Stories	17	08-05-2002 09:09 PM
Lowering a Conv. GT anyone done this one?	Big Bopper	Windsor Power	3	04-04-2002 11:02 AM
sn95 five lug conv for a fox	chatcher	Windsor Power	1	03-09-2002 11:48 AM
Sweet I'm as Senior Member.	Coupe Devil	Blue Oval Lounge	6	08-16-2001 08:50 AM
cobra conv. or just reg mass air conv.	terrible0ne	Windsor Power	3	03-10-2001 08:14 PM

03-29-2001, 03:35 PM	#2
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	Good run..Hopefully I will get to see that car of yours soon. I will prob drive mine this coming up wed. if the weather is nice enough. Get ahold of me if you want to meet up. ------------------ 347 Stroker Motor: Balanced, A9P Computer, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, Holley Fuel Regulator, March Underdrive Pulleys, Electric Fan, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 79mm Mass Air Unit, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, High Tolerant Painted Calipers and Drums.

03-29-2001, 11:48 PM	#3
sedanman Registered Member Join Date: Feb 1999 Location: Indianapolis, IN Posts: 963	Smokedawg we are going to the south side steak and shake in indy (on madison ave). We will get there about 10:00 on sat. Ezridn will be there too. Along with a few guys from the corvette forum.