O/H rear end.....need advice

fubar89lx · 04-28-2002, 10:28 PM

I was thinking of O/H my rear end. I was thinking of an auburn locker and mosier 31 spline axles. Not sure if I need to with mods I have. I also run with M/T E/T streets. I haven't used the NOS with slicks yet, only on radials. Scared I might break an axle. Let me know what you think. Thanks!

explicitone · 04-29-2002, 01:24 AM

I would upgrade your rear end if your are using any type of sticky tire and with the NOS I would without a doubt replace the stock trac lock and axles for any reason just to be on the safe side so you have less of a chance of haveing to tow your car home from the track

fubar89lx · 04-30-2002, 05:38 PM

thank for the advice. guess I will change everything

04-28-2002, 10:28 PM	#1
fubar89lx Registered Member Join Date: Apr 2002 Location: Palm Bay,FL Posts: 24	O/H rear end.....need advice I was thinking of O/H my rear end. I was thinking of an auburn locker and mosier 31 spline axles. Not sure if I need to with mods I have. I also run with M/T E/T streets. I haven't used the NOS with slicks yet, only on radials. Scared I might break an axle. Let me know what you think. Thanks! __________________ Best E/T-13.2 Best MPH-108 Mods-Full exhaust,U/D pulleys,73mm mass air,70 mm M/A,Cobra intake,Crane 1.7 R/R,E303 Cam,3.55 gear,125HP Nitrous Works.

04-29-2002, 01:24 AM	#2
explicitone Registered Member Join Date: Apr 2002 Location: racine ,wi Posts: 691	I would upgrade your rear end if your are using any type of sticky tire and with the NOS I would without a doubt replace the stock trac lock and axles for any reason just to be on the safe side so you have less of a chance of haveing to tow your car home from the track __________________ RUN IT STAIGHT AND RUN IT HARD ________ Novi 2000 60' 1.46 1/4 10.67 mph 126.5 _________

04-30-2002, 05:38 PM	#3
fubar89lx Registered Member Join Date: Apr 2002 Location: Palm Bay,FL Posts: 24	thank for the advice. guess I will change everything __________________ Best E/T-13.2 Best MPH-108 Mods-Full exhaust,U/D pulleys,73mm mass air,70 mm M/A,Cobra intake,Crane 1.7 R/R,E303 Cam,3.55 gear,125HP Nitrous Works.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
new rear end	fordkid68	Classic Mustangs	18	11-24-2009 08:05 PM
Any advice before starting on rear main?	Chris_H	Windsor Power	2	08-07-2003 02:15 AM
want rear disk without changing overall length of rear....please help!!!	dragstang86	Windsor Power	1	07-31-2003 06:32 PM
cobra rear ---- need rim and tire advice please help	dragstang86	Windsor Power	0	07-27-2003 01:22 PM
advice on rear main seal	Conman	Windsor Power	7	07-25-2002 09:15 PM