Anybody running Comp Polymers covers?

NotchJohnson · 12-12-2002, 11:37 AM

Im ordering a set of them and I would like to know what you guys did about installing a breather. Thanks, John

sn95gt19 · 12-13-2002, 11:21 PM

i want to know too. c'mon someones gotta be running these?

NotchJohnson · 12-14-2002, 11:47 AM

I called comp because they were on nationwide backorder. The mold for them was so worn out that the stud holes were no longer lining up properly. The guy said that they should be ready by the first of jan, so I called and put in an order. Comp sells screw in breather stands to screw into the top of the valve cover that just needs a clamp-on breather like the ones from k/n or something.

sn95gt19 · 12-14-2002, 01:09 PM

how much do these cost?

83tcoupe · 12-14-2002, 07:39 PM

dont waste your money. would not clear stud mount rockers had no pcv hole or breather hole. also no template where to make holes. BUY THE FORD RACING way better pieces

NotchJohnson · 12-15-2002, 01:23 PM

My friend had them on tw heads with stud mounts and they cleared fine. You need to drill a hole in the top, and either install a grommet for a push in breather, or get the post from comp that screws into the hole you drilled and get a clamp on breather. Why do you need a template, it tells you the size hole to drill?
Oh and sn95, they are 59 bucks, but with a breather and post mine are gonna be like 80-something all together.

HiFlow5 0 · 12-15-2002, 07:30 PM

Quote:

Originally posted by 83tcoupe
dont waste your money. would not clear stud mount rockers had no pcv hole or breather hole. also no template where to make holes. BUY THE FORD RACING way better pieces

The PCV hole in is the back of the lower intake, not the valve cover. Those valve covers are pretty much the same as my Trick Flow ones. All you need to do for the breather is drill a hole insert a rubber grommet, and get a push in breater just like NotchJohnson said.

86GT · 12-15-2002, 09:35 PM

I considered a set of Comp Polymer covers, but I got a set of Moroso Budget Eliminator (chrome, tall with baffles) a lot cheaper and right away. Comp had some delays with these covers (as stated earlier) so I went with the Moroso, and haven't had a problem with my stud mount rockers.

sn95gt19 · 12-15-2002, 09:41 PM

i think im just going to buy a set of trick flow covers, because those are on backorder. thanks

12-12-2002, 11:37 AM	#1 (permalink)
NotchJohnson Registered Member Join Date: Oct 2001 Location: Florida Keys Posts: 593	Anybody running Comp Polymers covers? Im ordering a set of them and I would like to know what you guys did about installing a breather. Thanks, John __________________ 89 notch-finally not stock!! ported gt40's, ported cobra intake, 65mm tb, 75mm maf, mac cai, lt's,prochamber, fms 1.6 rr, 125 shot.

12-13-2002, 11:21 PM	#2 (permalink)
sn95gt19 motors done......woohooo Join Date: Mar 2002 Posts: 799	i want to know too. c'mon someones gotta be running these? __________________ 95gt lazer red (98 cobra clone) Rice Haters Club Member #116

12-14-2002, 11:47 AM	#3 (permalink)
NotchJohnson Registered Member Join Date: Oct 2001 Location: Florida Keys Posts: 593	I called comp because they were on nationwide backorder. The mold for them was so worn out that the stud holes were no longer lining up properly. The guy said that they should be ready by the first of jan, so I called and put in an order. Comp sells screw in breather stands to screw into the top of the valve cover that just needs a clamp-on breather like the ones from k/n or something. __________________ 89 notch-finally not stock!! ported gt40's, ported cobra intake, 65mm tb, 75mm maf, mac cai, lt's,prochamber, fms 1.6 rr, 125 shot.

12-14-2002, 01:09 PM	#4 (permalink)
sn95gt19 motors done......woohooo Join Date: Mar 2002 Posts: 799	how much do these cost? __________________ 95gt lazer red (98 cobra clone) Rice Haters Club Member #116

12-14-2002, 07:39 PM	#5 (permalink)
83tcoupe Registered Member Join Date: Apr 2002 Posts: 3	valve covers dont waste your money. would not clear stud mount rockers had no pcv hole or breather hole. also no template where to make holes. BUY THE FORD RACING way better pieces

12-15-2002, 01:23 PM	#6 (permalink)
NotchJohnson Registered Member Join Date: Oct 2001 Location: Florida Keys Posts: 593	My friend had them on tw heads with stud mounts and they cleared fine. You need to drill a hole in the top, and either install a grommet for a push in breather, or get the post from comp that screws into the hole you drilled and get a clamp on breather. Why do you need a template, it tells you the size hole to drill? Oh and sn95, they are 59 bucks, but with a breather and post mine are gonna be like 80-something all together. __________________ 89 notch-finally not stock!! ported gt40's, ported cobra intake, 65mm tb, 75mm maf, mac cai, lt's,prochamber, fms 1.6 rr, 125 shot.

12-15-2002, 09:35 PM	#8 (permalink)
86GT Sniffed too much n20 Join Date: Oct 1998 Location: Ont, Canada Posts: 1,018	I considered a set of Comp Polymer covers, but I got a set of Moroso Budget Eliminator (chrome, tall with baffles) a lot cheaper and right away. Comp had some delays with these covers (as stated earlier) so I went with the Moroso, and haven't had a problem with my stud mount rockers. __________________ 2002 Windsor Weekend Q16 Qualifier

12-15-2002, 09:41 PM	#9 (permalink)
sn95gt19 motors done......woohooo Join Date: Mar 2002 Posts: 799	i think im just going to buy a set of trick flow covers, because those are on backorder. thanks __________________ 95gt lazer red (98 cobra clone) Rice Haters Club Member #116

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Car running lean, any suggestions?	MATTKNIGHT	Windsor Power	7	06-11-2003 09:11 AM
Valve Covers	NotchJohnson	Windsor Power	20	10-17-2002 01:01 PM
Car's running hot...	Sonics2042	Windsor Power	8	07-16-2002 05:50 PM
Valve covers	rbatson	Windsor Power	8	06-11-2002 12:56 AM
Comp Polymers Powerbox	vetteeatr	Windsor Power	2	09-17-2001 12:02 AM

Sponsored Links