MustangWorks.com : Ford Forums - View Single Post - anyone did a carb conversion and still used stock ignition system????

fast88 · 04-24-2002, 09:17 PM

There are 4 wires coming off of the module just wire up the wires as shown in the above post ,like I said I can't remember where I found this and I certainly don't know if it will work but let me know if it does.Good Luck!!

04-24-2002, 09:17 PM	#6
fast88 Registered Member Join Date: Mar 2002 Location: Rockingham,N.C. Posts: 80	duh ! lol jis kiddin! There are 4 wires coming off of the module just wire up the wires as shown in the above post ,like I said I can't remember where I found this and I certainly don't know if it will work but let me know if it does.Good Luck!! __________________ 88 Notchback orig. 4 cylinder car with a efi v8 swap from a wrecked 89 5.0 hatch,edelbrock performer rpm's 190/160,typhoon intake,comp cams 1.6 rockers,65mm tb and spacer,pa performance c4 w/ 3000 stall,3.73's auburn pro, 31 spline mosers,mac off road h-pipe,1 5/8 shorties ,and 2 1/2 pro dumps,kirban fpr,190 lph walbrp. SOON TO BE BLOWN!