Gaskets - Which ones and where do I get them from? Please help quick.

2FastLX · 03-13-2001, 12:28 PM

I know I've had a few posts goig lately needing some help, but every day it's something different =(

I'm replacing my head gaskets and I went to Auto Zone and bought a kit. The head gaskets are around .051 thick and the ports on the intake gaskets are 1.1"x1.95". These figures don't seem right after hearing that Fel-Pro 1250 intake gaskets have ports that measure 1.2"x2.0" and the head gaskets everyone uses (1011-1 and 1011-2) are .039" and .041" thick.

Where can I get a complete head kit with 1101-2 head gaskets and 1250 intake gaskets? And I need to have them by Friday or Saturday at the latest.

------------------
Indiana Stangers Association
Buy your parts here

[This message has been edited by 2FastLX (edited 03-13-2001).]

84_GT350 · 03-14-2001, 12:08 PM

Try direct from Fel-Pro. If that's a no-go, try Summit, Jegs, and the like. Good luck man.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

03-13-2001, 12:28 PM	#1
2FastLX The Photoshop Guru Join Date: Feb 2001 Location: Mecca, Indiana Posts: 1,419	Gaskets - Which ones and where do I get them from? Please help quick. I know I've had a few posts goig lately needing some help, but every day it's something different =( I'm replacing my head gaskets and I went to Auto Zone and bought a kit. The head gaskets are around .051 thick and the ports on the intake gaskets are 1.1"x1.95". These figures don't seem right after hearing that Fel-Pro 1250 intake gaskets have ports that measure 1.2"x2.0" and the head gaskets everyone uses (1011-1 and 1011-2) are .039" and .041" thick. Where can I get a complete head kit with 1101-2 head gaskets and 1250 intake gaskets? And I need to have them by Friday or Saturday at the latest. ------------------ Indiana Stangers Association Buy your parts here [This message has been edited by 2FastLX (edited 03-13-2001).]

03-14-2001, 12:08 PM	#2
84_GT350 Registered Member Join Date: Apr 1999 Location: Overland Park, KS, USA Posts: 1,631	Try direct from Fel-Pro. If that's a no-go, try Summit, Jegs, and the like. Good luck man. ------------------ 1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s