MustangWorks.com : Ford Forums - View Single Post

Jeff Chambers · 10-31-2004, 07:51 AM

I always use the single-piece rubber gasket available from Ford. I also put a dab of silicone at each corner when putting it on and will run a continuous bead of clear silicone around the entire pan-to-block joint after the pan is installed. I've never had leaks. I guess I go to this extent because I hate the thought of leaks....seems to work.

10-31-2004, 07:51 AM	#2
Jeff Chambers Moderator Join Date: Aug 2000 Location: Milan, OH Posts: 2,699	Re: Anyone using Canton racing pans? I always use the single-piece rubber gasket available from Ford. I also put a dab of silicone at each corner when putting it on and will run a continuous bead of clear silicone around the entire pan-to-block joint after the pan is installed. I've never had leaks. I guess I go to this extent because I hate the thought of leaks....seems to work. __________________ Jeff Chambers 1990 Mustang GT 10.032 Seconds / 137.5 MPH 14-time Street Warrior World Record Setter CRT Performance 2001 Tropic Green Mustang GT - 12.181 / 113.2 MPH 2002 Ford F-250 Crew Cab 7.3l Power Stroke - 17.41@77.2 "There's nothing boring about a small block automatic shifting gears at 9400 rpm!"