MustangWorks.com : Ford Forums - View Single Post

Barry Jackson · 12-11-2002, 02:34 PM

I am getting a C4 built this winter. Need to be sure to get the large bellhousing and if you use the stock flexplate, then need the large bolt pattern, 117/8'' for the converter. Get a good after market shifter, rewire the neutral safety switch and you should good to go. FYI, most tranny guys prefer the dip stick in the case vs pan. I have been reading every article in the mags about the swap that I could find. Anyone with addl info. please let me know.
Thanks,

12-11-2002, 02:34 PM	#4
Barry Jackson Registered Member Join Date: Oct 1998 Location: Pitts. Pa. USA Posts: 61	AOD - C4 swap I am getting a C4 built this winter. Need to be sure to get the large bellhousing and if you use the stock flexplate, then need the large bolt pattern, 117/8'' for the converter. Get a good after market shifter, rewire the neutral safety switch and you should good to go. FYI, most tranny guys prefer the dip stick in the case vs pan. I have been reading every article in the mags about the swap that I could find. Anyone with addl info. please let me know. Thanks, __________________ 87 LX, 74 351W, performer plus intake, holley 750, vac sec., 78 prim. 80 sec., 50 pump: Wolverine cam 292-512, windsor heads, ported 3 angle valve, 4:10 rear, AOD, Lentech valve body w/ 10'' converter. No time slips yet!