MustangWorks.com - The Ford Mustang Power Source!

Go Back   The Mustang Message Board > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Reply
 
LinkBack Thread Tools Rate Thread Display Modes
Old 07-03-2001, 06:44 PM   #1 (permalink)
88conv
Registered Member
 
Join Date: May 2001
Location: Athens,Ga.
Posts: 26
Post aod problems

Just put in transgo shift kit, runs great but totally missing second. I think there may be too much fluid or would that do it?
88conv is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-03-2001, 09:06 PM   #2 (permalink)
foxandfoe
Registered Member
 
Join Date: Jun 2001
Location: new castle pa
Posts: 32
Post

tear it back out and look it over esp. 1-2 valve. check tv. cable first though. you probly put somthing in wrong also wouldnt be bad idea to put in a servo while your up there heres a good article on the transgo kit. http://www.fordmuscle.com/archives/2...it/index.shtml heres a good site on trannys http://www.transonline.com/
foxandfoe is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-04-2001, 01:38 AM   #3 (permalink)
macx
Registered Member
 
Join Date: Oct 1999
Location: Gordonville MO USA
Posts: 448
Post

A good upgrade for the 2-3 accumulator
is Art Carr's "zero leak" 2-3 accumulator.
About $35 or so. Also good time to
add A od servo.
macx is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-04-2001, 02:18 AM   #4 (permalink)
9SecLX
Registered Member
 
Join Date: Feb 2001
Location: Lafayette,IN USA
Posts: 18
Smile

I agree with macx, Art Carr's 2-3 accumulator. I installed the Art Carr shift kit(with 2-3 acc.) in my AOD. The accumulator is 10 times better then stock. The tv cable should be re-adjusted. I had to play around with mine a bit to get it right but it won't cause it to miss 2nd. Too much fluid will make the fluid foam up and eventually burn up the tranny. I would pull the valve body back out and make sure everything was right.

------------------
88 LX Notch - 302(86 crown Vic- changed to HO), stock cam, ported stock heads, 76mm C&L mass air, 70mm Mac tb and EGR, Victor 5.0 intake(it's killing low end torque ), Walbro 190lph intank fuel pump, 24lb injectors, FT long tube headers, offroad H-pipe, Flowmasters, Compucar NOS kit 125 shot pill, Aod - Art Car shift kit, FMS 430 gears, 28x10.5 M/T Sportman Pro rears(soon on 9" Weld Draglites), Kumho fronts on 4" Weld Draglites.
http://www.indianastangers.com
ICQ# 37309223
9SecLX is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 07-04-2001, 09:24 AM   #5 (permalink)
88conv
Registered Member
 
Join Date: May 2001
Location: Athens,Ga.
Posts: 26
Post

Thanks, it is coming off again today.
88conv is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
what if any problems with your Modular Model Gt/Cobra? fixer Modular Madness 18 04-03-2005 10:18 AM
HELP: Problems after Paxton Novi 1000 install Meatman Windsor Power 3 10-17-2002 07:03 PM
Sick 88 Gt Computer problems? ziggy_2k Windsor Power 5 06-02-2002 11:33 PM
'65 - Pull Away Problems - Action Plan geordie Classic Mustangs 0 05-14-2002 02:43 PM
Cooling System problems 1973Mach1 Classic Mustangs 7 06-25-1999 11:33 PM


All times are GMT -5. The time now is 11:48 AM.


SEARCH