MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   aod problems (http://forums.mustangworks.com/showthread.php?t=4207)

88conv 07-03-2001 05:44 PM

aod problems
 
Just put in transgo shift kit, runs great but totally missing second. I think there may be too much fluid or would that do it?

foxandfoe 07-03-2001 08:06 PM

tear it back out and look it over esp. 1-2 valve. check tv. cable first though. you probly put somthing in wrong also wouldnt be bad idea to put in a servo while your up there heres a good article on the transgo kit. http://www.fordmuscle.com/archives/2...it/index.shtml heres a good site on trannys http://www.transonline.com/

macx 07-04-2001 12:38 AM

A good upgrade for the 2-3 accumulator
is Art Carr's "zero leak" 2-3 accumulator.
About $35 or so. Also good time to
add A od servo.

9SecLX 07-04-2001 01:18 AM

I agree with macx, Art Carr's 2-3 accumulator. I installed the Art Carr shift kit(with 2-3 acc.) in my AOD. The accumulator is 10 times better then stock. The tv cable should be re-adjusted. I had to play around with mine a bit to get it right but it won't cause it to miss 2nd. Too much fluid will make the fluid foam up and eventually burn up the tranny. I would pull the valve body back out and make sure everything was right.

------------------
88 LX Notch - 302(86 crown Vic- changed to HO), stock cam, ported stock heads, 76mm C&L mass air, 70mm Mac tb and EGR, Victor 5.0 intake(it's killing low end torque ;) ), Walbro 190lph intank fuel pump, 24lb injectors, FT long tube headers, offroad H-pipe, Flowmasters, Compucar NOS kit 125 shot pill, Aod - Art Car shift kit, FMS 430 gears, 28x10.5 M/T Sportman Pro rears(soon on 9" Weld Draglites), Kumho fronts on 4" Weld Draglites.
http://www.indianastangers.com
ICQ# 37309223

88conv 07-04-2001 08:24 AM

Thanks, it is coming off again today.


All times are GMT -5. The time now is 05:59 AM.