|
Auto Meter Air/Fuel Guage?
I hooked up the Air/Fuel Guage as Directed..The three wires before the oxygen Sensor i was told you use. My question is... I get no read out on the Guage and when i turn my lights on it goes off..which means i hooked up the 12v Source wrong. Which color wire to the oxygen sensor do i hook it up to?? I'm pretty lost at this point.
www.Brooklynmustangcentral.com ------------------ 88 GT,70mm Throttle Body & EGR,BBK Fenderwall Induction,Aluminum Driveshaft,T-5 Worldclass,Flex-Fan,Underdrive Pulleys,Headers,H-Pipe,3.73 Gears,GT-40 Intake and Flowmasters,MSD 6AL Ignition,190 Fuel Pump, MSD Ignition, B303 Cam, 1.6 Rockers, Crane Pushrods & Lifters, 75mm Bullet, Lakewood 50/50's, BBK Upper & Lower Control arms, BBK K Brace, Subframe Connectors, Eibach Springs, Throttle Responce enhancer. |
Go to Autometers website and click on TECHTIPS/FAQ, they tell all about it. http://www.autometer.com/hp/index.html
------------------ 93GT, S-trim (2.95 pulley), SFMU, Stage 2 TFS TW heads, Stage 2 Cobra intake, AFM powerpipe, PRO-M 75mm massair, 75mm throttle body, 42lb.inj. 1 5/8 headers, 2 1/2 h-pipe and exhaust, 2 chamber Flowmasters, 3.55 gears, Ultradyne cam, Elder.timing gears, Black Magic fan, 3 row alum.rad. MSD6al/BTM, MSD coil, MSD shift light, subframe connectors, A-pillar gauges, Pro-5.0 shifter. |
| All times are GMT -5. The time now is 10:34 PM. |