That plastic thing is a plug used to seal up the port where the oil filler tube goes.It gets popped out when the trans is put in the car and the filler tube is installed for the first time.
------------------
92LX 5.0 Hatch,4.10 gears Auburn Pro,Mosser axels,alum drive shaft AOD hi ratio gear set,3200 stall TCI conv,MAC long tubes 2 chamber flow masters,2.5inch exhaust,331 stroker,alum GT40 heads ported,Omega 1.7 roller rockers,JE forged pistons,Eagle rods,E cam,GT40 upper/lower intake,70mm mass,73mm Pro M bullet,MSD ignition,Cartech fuel sys,30lb injectors,Vortech S trim
|