Back in business.

88workcar · 04-28-2005, 06:46 AM

A week ago I grabbed a stock 87 motor for 250.00, 123,000 miles. I droped it in the ol green monster. I let my buddies drive it last night, on raidials the went 13.70s down to a 13.24 all around 100mph. I made the last pass and only one pass. 13.02 @ 103.99 with a 1.85 60ft. It was so fun to be back at it. I can't wait to finish the 342. Well now for the Question, B or E cam in this stock motor, I have both, I like the B better. What do Yall think.

USMC302 · 04-28-2005, 01:13 PM

Quote:

Originally Posted by 88workcar

What do Yall think.

What do we think? I think if you can get a stocker to do 13.0's, I need to have you tune my new stock 91.

04-29-2005, 03:54 PM

I've been away from this site for a while. But I remember that your car has been lightened quite a bit, right? 13.0 @ basically 104mph is damn impressive for a stock 5.0 motor. How much does your car weigh 88workcar? You've got some drag suspension on their don't you? Is that 1.85 60' on a street radial I take it?

88workcar · 04-30-2005, 10:35 PM

Yal are both correct, LIGHT car and drag suspension. The tune on it sucks right now. No T-stat, heavy black smoke. I will put a stat in it Sun, 180 and a fuel press reg, so I can lean it down a bit. I am trying to get a set of drag raidials. I don't want to use my slicks or ET streets because I only have three bolts in the tranny. I will have to replace the tranny case, one ear is broke. $200 from now. I built a tranny today, for ol grocerygetter, He will put the smack down on me wed night. When I fix the tranny case he will get a dose of the "get right juice" and the slicks. It is so nice to be back at it.

88workcar · 04-30-2005, 10:37 PM

USMC come to the track wed night

USMC302 · 05-02-2005, 07:36 AM

No Problem Raceway?

88workcar · 05-02-2005, 01:44 PM

Yep, I will be running the 4 wheeler and the car. I have the wheeler at a 6.45 @ 100.2 so far

JoeDirt88 · 05-02-2005, 09:15 PM

From one SD-er to another, go for the 13.0's on the stock cam! That's really close already. I wish I had done it myself, I got it to 13.26 @ 101.5, all stock except for pullies and exhaust, on some rock-hard Pirelli P500's that were on the pony wheels I bought. I really regret not seriously trying to get there before I pulled it apart and put in the Exploder motor, but you know how 'Stangers are when it comes to mods...

But, if you're going to do it, I'd go with the B-cam as well.

04-28-2005, 06:46 AM	#1
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Back in business. A week ago I grabbed a stock 87 motor for 250.00, 123,000 miles. I droped it in the ol green monster. I let my buddies drive it last night, on raidials the went 13.70s down to a 13.24 all around 100mph. I made the last pass and only one pass. 13.02 @ 103.99 with a 1.85 60ft. It was so fun to be back at it. I can't wait to finish the 342. Well now for the Question, B or E cam in this stock motor, I have both, I like the B better. What do Yall think. __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

04-29-2005, 03:54 PM	#3
Simi Stang Guest Posts: n/a	Re: Back in business. I've been away from this site for a while. But I remember that your car has been lightened quite a bit, right? 13.0 @ basically 104mph is damn impressive for a stock 5.0 motor. How much does your car weigh 88workcar? You've got some drag suspension on their don't you? Is that 1.85 60' on a street radial I take it?

04-30-2005, 10:35 PM	#4
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Re: Back in business. Yal are both correct, LIGHT car and drag suspension. The tune on it sucks right now. No T-stat, heavy black smoke. I will put a stat in it Sun, 180 and a fuel press reg, so I can lean it down a bit. I am trying to get a set of drag raidials. I don't want to use my slicks or ET streets because I only have three bolts in the tranny. I will have to replace the tranny case, one ear is broke. $200 from now. I built a tranny today, for ol grocerygetter, He will put the smack down on me wed night. When I fix the tranny case he will get a dose of the "get right juice" and the slicks. It is so nice to be back at it. __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

04-30-2005, 10:37 PM	#5
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Re: Back in business. USMC come to the track wed night __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

05-02-2005, 07:36 AM	#6
USMC302 Registered Member Join Date: Apr 2001 Location: Gallatin, Tn Posts: 1,326	Re: Back in business. No Problem Raceway? __________________

05-02-2005, 01:44 PM	#7
88workcar Registered Member Join Date: Oct 1999 Location: Pierre Part, La. U.S.A. Posts: 1,850	Re: Back in business. Yep, I will be running the 4 wheeler and the car. I have the wheeler at a 6.45 @ 100.2 so far __________________ 88workcar 1988 Mustang LX 342. 417rwhp @ 6800. 28 X 10 ET Drag, 4.30s, 10.69 @ 126.43 1.42 60ft. 11.13 @ 127.7 on BFGs 1.72 60ft Rice Hater # 42 To be old and wise, You must first be young and stupid I'm somewhere in tthe middle.

05-02-2005, 09:15 PM	#8
JoeDirt88 Registered Member Join Date: May 2004 Posts: 7	Re: Back in business. From one SD-er to another, go for the 13.0's on the stock cam! That's really close already. I wish I had done it myself, I got it to 13.26 @ 101.5, all stock except for pullies and exhaust, on some rock-hard Pirelli P500's that were on the pony wheels I bought. I really regret not seriously trying to get there before I pulled it apart and put in the Exploder motor, but you know how 'Stangers are when it comes to mods... But, if you're going to do it, I'd go with the B-cam as well. __________________ '88 Vermillion Hatchback NOT red interior (gray!) 1998 Explorer motor Speeeeeed Density! Ported Cobra intake P heads P headers prochamber h-pipe flowmaster louds AOD with B&M 2400 converter 5-Speed 3.73's- need Auty 4.10's!!! RR's, CAI, etc, etc... Smogless engine bay Nitto Drag Radials and... NEW BLACK CARPET!!! 5-Speed ran 12.70's AOD ran 13.20's

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I'm back.....And still Crazy.	Mercury	Blue Oval Lounge	14	10-30-2002 02:41 AM
I'm back, anyone miss me?	rustang girl	Blue Oval Lounge	18	10-10-2002 11:34 PM
Back in the Game......	1969Mach1	Blue Oval Lounge	27	10-08-2002 10:56 PM
Back from the Track - Good News/Bad News with Diablo	apenn	Modular Madness	1	09-22-2002 02:50 AM