![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
#1 |
Registered Member
Join Date: Mar 1999
Location: Leesport, PA USA
Posts: 24
|
![]() Hello everyone. I have a major problem that I need resolved in a hurry. Yesterday at the track the backing plate for the balancer somehow broke off. I am confused as to how all these balancers work and stuff. How are they counterweighted? Are the counterweights keyed so they can't go on wrong? The balancer I had says SFI approved converted to 28oz. Now, this don't tell me much. If anyone can help PLEASE DO!! I need to order a new one soon. I want to go with ATI or Fluidampr. I have the 5.0 HO timing cover and the balancer is a 4 hole. Thank you for help.
__________________
89GT, 392, AFR 185's, 11.30:1 compression, Victor Jr., 241/251 dur. @.050 with .570 lift with 1.72's, 750 Speed Demon,1 3/4 longtubes, C4 w/ 8in., 3.73's, Detroit Locker, sway bar off front, Moroso Trick drag springs on all 4 corners, Pro3I control arms with adjustable spring jack, HPM Double adjustable uppers, solid bushings, 70/30's, subframes, 3" X-pipe, 2 chamber flows (3") 11.05 @ 120 1.51 60ft. on 26x10 Hoosier slicks. 11.06 @ 121 1.54 60ft. with the 8 inch and 26x10 Mickey slicks. |
![]() |
![]() |
![]() |
#2 |
Factoy Five Roadster
Join Date: May 2000
Location: Sevier Co,Tennessee
Posts: 1,681
|
![]() I might be missing something in your post but, If you have a 89 motor it should have a 50oz Harmonic Balancer & flexplate. Unless it was somehow changed when the motor was built?
Pre-1980 motors used 28.2 oz Balancer and flexplate. Either way the balancer is keyed, to only fit one way on the crank. ( For dummies like me) If a 28.2 oz was bolted onto a late model 5.0 it should have gave a good vibration. Maybe thats why your balancer came apart? |
![]() |
![]() |
![]() |
#3 |
Registered Member
Join Date: Mar 1999
Location: Leesport, PA USA
Posts: 24
|
![]() Its a stroked 351. I should have made that clear.
__________________
89GT, 392, AFR 185's, 11.30:1 compression, Victor Jr., 241/251 dur. @.050 with .570 lift with 1.72's, 750 Speed Demon,1 3/4 longtubes, C4 w/ 8in., 3.73's, Detroit Locker, sway bar off front, Moroso Trick drag springs on all 4 corners, Pro3I control arms with adjustable spring jack, HPM Double adjustable uppers, solid bushings, 70/30's, subframes, 3" X-pipe, 2 chamber flows (3") 11.05 @ 120 1.51 60ft. on 26x10 Hoosier slicks. 11.06 @ 121 1.54 60ft. with the 8 inch and 26x10 Mickey slicks. |
![]() |
![]() |
![]() |
#4 |
Factoy Five Roadster
Join Date: May 2000
Location: Sevier Co,Tennessee
Posts: 1,681
|
![]() Hope I didn't sound harsh.
351 balancer and flexplate are interchangable with the 302 etc. And the years still apply. The small blocks are the same. If it is a pre-1980 motor it still will use a 28.2 oz. Just go ahead and order a fluid dampner, they work great but a little pricy. Just bolts on one way. I had a TCI rattler a few years back, annoying. |
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Jun 2000
Location: Florence, KY,USA
Posts: 210
|
![]() i have a 331 with a 28 oz fluidamper i bought from dirttrackthunder.com for 129 or 139 i think, it was really cheap but you have to order a special spacer for it to fit, i bought my spacer from professional products dealer for 15 bucks i think it was, the part number was 8006 or 81006 if i remember right.
|
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
speedy density to mass air questions | thdrcat | Windsor Power | 3 | 09-25-2003 09:20 PM |
Harmonic Balancer (part 2) | TJR | Windsor Power | 5 | 09-23-2001 06:09 AM |
Harmonic Balancer question for X Trooper Mustang | 89FHPLX | Windsor Power | 2 | 08-20-2001 09:03 PM |
Harmonic balancer questions | 302 LX Eric | Windsor Power | 4 | 03-15-2001 04:57 PM |
Balancer: Removing questions??? | quick89gt | Windsor Power | 3 | 02-25-2001 07:37 PM |