MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   BAP sensor question (http://forums.mustangworks.com/showthread.php?t=31819)

Bad89stang 12-01-2002 09:42 PM

BAP sensor question
 
Does the BAP sensor have a vacuum line attached to it? Mine has a fitting on the left side that looks like a vacuum line would attach to it. All of the other BAP sensors that I have seen have a white plastic insert that goes into the sensor.
My car is an '89 if that makes a difference.

Old Guy with 87 GT 12-02-2002 07:37 AM

if your car is equiped with a mass air sencer then ,no it doesn't get a vac line attached

89 and up mustangs have a mass air ecu it only uses that sencer to read atmospheric pressure

86-88 mustangs have a speed density ecu ,there the ones that need the vac line attached to that senser.....speed density needs the sencer for reading engine load as well as atmospheric pressure

......the sencer on both speed density and mass air are identacal sencors except for the little white fitting to prevent a vac line being attached for the mass air cars........somtimes peaple miss match and use the ones with out the white fitting cause there basicly the same sencer ,just used for different purposes

Bad89stang 12-02-2002 08:31 AM

thanks
 
That is what I need to know. Thanks.


All times are GMT -5. The time now is 02:47 AM.