MustangWorks.com - The Ford Mustang Power Source!

Go Back   MustangWorks.com : Ford Forums > Mustang & Ford Tech > Windsor Power
Register FAQ Members List Calendar Mark Forums Read

Reply
 
LinkBack Thread Tools Rate Thread Display Modes
Old 12-01-2002, 08:42 PM   #1 (permalink)
Bad89stang
Registered Member
 
Bad89stang's Avatar
 
Join Date: Aug 2001
Location: Ft. Worth, TX
Posts: 456
Default BAP sensor question

Does the BAP sensor have a vacuum line attached to it? Mine has a fitting on the left side that looks like a vacuum line would attach to it. All of the other BAP sensors that I have seen have a white plastic insert that goes into the sensor.
My car is an '89 if that makes a difference.
__________________
You're gonna need your seatbelt
Bad89stang is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 12-02-2002, 06:37 AM   #2 (permalink)
Old Guy with 87 GT
Registered Member
 
Old Guy with 87 GT's Avatar
 
Join Date: May 2001
Location: Harrisburg, Pennsylvania
Posts: 379
Default

if your car is equiped with a mass air sencer then ,no it doesn't get a vac line attached

89 and up mustangs have a mass air ecu it only uses that sencer to read atmospheric pressure

86-88 mustangs have a speed density ecu ,there the ones that need the vac line attached to that senser.....speed density needs the sencer for reading engine load as well as atmospheric pressure

......the sencer on both speed density and mass air are identacal sencors except for the little white fitting to prevent a vac line being attached for the mass air cars........somtimes peaple miss match and use the ones with out the white fitting cause there basicly the same sencer ,just used for different purposes
__________________
the "not so old",old guy
87 Mustang GT T-top >hanlon t-5, pro 5.0, centerforce clutch ,adj. cable/quatrant ,3.27s ,full 2 1/2 ex(off road H) adj. reg. ,e-cam ,70mm TB, cobra intake ,1.7rr ,ported/milled e7ets w/crane springs ,306 balaced/decked short block w/speed pro forged flat top pistons ...257rwhp/302rwt
best et 13.7@102 (4/11 )

'80 Capri (future project,currently collecting parts for 351 moter)
Old Guy with 87 GT is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Old 12-02-2002, 07:31 AM   #3 (permalink)
Bad89stang
Registered Member
 
Bad89stang's Avatar
 
Join Date: Aug 2001
Location: Ft. Worth, TX
Posts: 456
Default thanks

That is what I need to know. Thanks.
__________________
You're gonna need your seatbelt
Bad89stang is offline  
Digg this Post!Add Post to del.icio.usBookmark Post in TechnoratiFurl this Post!
Reply With Quote
Sponsored Links
Reply


Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -5. The time now is 07:38 PM.


SEARCH