bassani x pipe

jprichard · 07-06-2001, 09:07 PM

I just put a bassani x pipe with catalytic converters on my 93 Ford Mustang. The car
now knocks and pings during acceleration and on hills. The rest of the exhaust system is stock. I replaced the Oxygen sensors at the time of installation and the timing is set at the stock 10 degrees. The fuel pump is stock but only about a month old. Has any one else out there had this problem? If I
unplug the battery to reset the computer how
long should it be disconnected? Any help would be greatly apreciated. Thanx

moponys · 07-14-2001, 01:02 AM

You shouldn't have to reset the computer when you changed the O2 sensors and the x-pipe. I have the same pipe as you on a 94 mustang gt and didn't have any problems with pinging after the installation. Are you using high octane fuel?

Stang Runner · 07-14-2001, 05:26 AM

I don't think the X-pipe could do that but when installing it you may of mess some thing on the engine may be the O2 sensors are not working? I really dont know

I hope you get it working!

------------------
1988 LX 5.0 Was 3060lbs (full Tank) 14.65@101.3 On a Gtech Drivetrain: 3.55, World Class T-5, Lakewood Bellhousing, Adjustable Cluch Cable, AL Driveshaft, Manual Steering Rack Suspension: MAC Control Arms,Maximum Motorsports Front Grip Package, H&R Sport Spings, Bilstein Shocks
Engine: Steal Mounts, K&N, Under Drive Pulles Exhaust: 1 5/8 Un-Equal Length Mac Headers, X-pipe W\cats, Edelbrock cat\back Cooling:3 Core Radiator

07-06-2001, 09:07 PM	#1
jprichard Registered Member Join Date: Jul 2001 Location: charlotte, North Carolina, United States Posts: 1	bassani x pipe I just put a bassani x pipe with catalytic converters on my 93 Ford Mustang. The car now knocks and pings during acceleration and on hills. The rest of the exhaust system is stock. I replaced the Oxygen sensors at the time of installation and the timing is set at the stock 10 degrees. The fuel pump is stock but only about a month old. Has any one else out there had this problem? If I unplug the battery to reset the computer how long should it be disconnected? Any help would be greatly apreciated. Thanx

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
bassani x pipe	ac97gt	Modular Madness	8	07-10-2003 05:49 AM
Every Cobra R delivered from the factory is equipped with the BASSANI X pipe.....	StangGT2002	Modular Madness	15	04-09-2002 09:21 AM
BASSANI X PIPE w/CATS....NEED INFO	StangGT2002	Modular Madness	1	03-25-2002 09:27 PM
can bbk hedders work with bassani x pipe	Mustangboy89	Windsor Power	1	01-24-2002 05:48 AM
mac or flowmaster with bassani x pipe?	horse with no name	Windsor Power	4	08-09-2001 04:19 PM

07-14-2001, 01:02 AM	#2
moponys Registered Member Join Date: May 2001 Location: Antioch, CA 94521 Posts: 181	You shouldn't have to reset the computer when you changed the O2 sensors and the x-pipe. I have the same pipe as you on a 94 mustang gt and didn't have any problems with pinging after the installation. Are you using high octane fuel?

07-14-2001, 05:26 AM	#3
Stang Runner Registered Member Join Date: Jun 1999 Location: Walker, MI, USA Posts: 1,202	I don't think the X-pipe could do that but when installing it you may of mess some thing on the engine may be the O2 sensors are not working? I really dont know I hope you get it working! ------------------ 1988 LX 5.0 Was 3060lbs (full Tank) 14.65@101.3 On a Gtech Drivetrain: 3.55, World Class T-5, Lakewood Bellhousing, Adjustable Cluch Cable, AL Driveshaft, Manual Steering Rack Suspension: MAC Control Arms,Maximum Motorsports Front Grip Package, H&R Sport Spings, Bilstein Shocks Engine: Steal Mounts, K&N, Under Drive Pulles Exhaust: 1 5/8 Un-Equal Length Mac Headers, X-pipe W\cats, Edelbrock cat\back Cooling:3 Core Radiator