MustangWorks.com : Ford Forums - View Single Post

Dog5ohfun · 02-23-2004, 01:27 AM

I got the taylor wiring kit with the aluminum box. You will need about 20ft of positive wire to reach the starter selenoid. I am using 1/0 guage left over from my stereo days. The ground wire I used is 4 gauge and I ran it through the rubber grommet on the passenger side of the floor at the front of the floor, in the hatch area. I then grounded it by the quad shock to the rear frame rail. Hope this helps.

02-23-2004, 01:27 AM	#2
Dog5ohfun Registered Member Join Date: Feb 2002 Location: Arlington, Washington Posts: 92	I got the taylor wiring kit with the aluminum box. You will need about 20ft of positive wire to reach the starter selenoid. I am using 1/0 guage left over from my stereo days. The ground wire I used is 4 gauge and I ran it through the rubber grommet on the passenger side of the floor at the front of the floor, in the hatch area. I then grounded it by the quad shock to the rear frame rail. Hope this helps. __________________ Black 1990 LX DSS Racing Super Pro Bullit 331, AFR 185, Anderson B31 Cam, 1.6 DSS rockers, Cobra Intake w/ 2 phenolic spacer, Aluminum DS, 3.73 gears, Tremec 3550, Lakewood SFI Bellhousing, MSD Digital 6+, Spintech Side Exhaust,