I just finished my relocation 2 weeks ago, I used a Moroso sealed box, a Moroso switch, 25ft of 1/0 welding cable(standard auto cable wont cut it)20ft of 2ga welding cable, and marine battery terminals, NAPA had all the neccassary cable lugs for cheap. I ran the 1/0 from one side of the switch to the battery POS+, I then ran 1/0 from the other side of the switch up to the solenoid, I used a another short piece of 1/0 to ground the battery to the quad shock mount. I ran a piece of 2ga side of the switch the battery is connected directly to up to the alternator. I then used a short piece of 2ga to ground the engine to the sway bar mount. be sure to run a 10ga wire from the swaybar mount to where the ECU grounds, and your set.
Scott
|