Quote:
Originally posted by whitepony
ok ackbar00 this is what i got
1. 15 feet of 2ga wire
2. bat hold down
but now were do i run it is it best to go throught teh fire wall or under the car ( i would rather go in the car ) and do i have to ground the engine at the front? isnt it already grounded to the firewall ?
and i dont need to do anything with my alt. wire just leave it alone?
thanks
-mike
|
Need more 2 ga. I ran my postive in the car, comes into the engine bay through the steering gromment. I have mine grounded in the rear (I think it is the rear bumper cover bolt) and in the front at the factory location. I was having charging problems, that is why I have two locations. If you run them both in the car next to each other, this will prolly cause radio interference (Someone check me on this.
)The ground is run on the outside, along the fuel lines, just drilled a small hole with a gromment. Nope, no messing with the alt wiring, unless you want to do a 130 amp upgrade
Like I said, If you run your new wires back to where they were when the battery was up front, you can not go wrong.