BBK Intake and computer/injector question
 

Guys, I am looking at the new BBK SSI intake for my car. I have a motor that was installed by the previous owner so I don't know the whole story. It's in an '89. It has cam, headers, GT40P heads, Ford/Crane roller rockers, Cobra intake. I have put on an Edlebrock 70mm TB and a Granatellie MAS for 19# injectors. Question: if I go with this intake and 24# injectors, do I have to change the computer or just the MAS? Will the computer adjust itself? Thanks,
Jim

Re: BBK Intake and computer/injector question
 

Changing injectors requires a re-calibrated mas air or computer upgrade via a chip.

Re: BBK Intake and computer/injector question
 

Larry, I understand I need a new MAF for 24#. But, do I need to do anything to the computer or replace it?

Re: BBK Intake and computer/injector question
 

No changes to the EEC are needed with a properly calibrated MAF. There are articles here on EEC and MAF processing. Check them out as there is good info in them.

Re: BBK Intake and computer/injector question
 

Thanks for the help.