Belt Size???

88PONY · 04-24-2001, 11:06 AM

Does anybody know what size belt I should
run? I have no A/C,P/S,or airpump. My alt, waterpump are stock along with all my pulleys (crank also). I also have the stock alt. bracket and tensioner set-up.

Thanks Guys/Gals

shovelnose · 04-24-2001, 12:23 PM

This is a Dayco # 5060445. I think 44.5" long. I ran this with the set-up you are talking about. Should also work with UD pullies.

Keep in mind the WP should be a clockwise spinning pump. Your 88 will be counter-clockwise. Unless you have the idler pulley on the dr. side of the motor, then dis-regard all info.

My set-up is three pullies and alt. idler arm. The tensioner is very close to it's limits, but it works fine.

------------------
82 Mercury Capri 302.
Comp. Cams
Tremec 3550
3.73's
12.8@106 N/AKevin's Capri

[This message has been edited by shovelnose (edited 04-24-2001).]

04-24-2001, 11:06 AM	#1
88PONY Registered Member Join Date: Nov 2000 Location: INDIO CA USA Posts: 141	Belt Size??? Does anybody know what size belt I should run? I have no A/C,P/S,or airpump. My alt, waterpump are stock along with all my pulleys (crank also). I also have the stock alt. bracket and tensioner set-up. Thanks Guys/Gals

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Serpine belt size	stock89	Windsor Power	1	06-10-2004 08:11 AM
Belt size for pulleys	my9250GT	Windsor Power	7	01-22-2003 11:47 AM
What size belt with underdrive pullies, 130A alt. & no A/C	Kamaro Killer	Windsor Power	3	07-25-2002 11:43 PM
What size belt for bypassed p/s??and race with wrx	Coupe5oh	Windsor Power	4	04-10-2002 03:03 PM
what size belt do I need??	82 GT	Windsor Power	0	03-24-2001 09:55 AM

04-24-2001, 12:23 PM	#2
shovelnose Registered Member Join Date: Oct 2000 Location: Ontario, Canada Posts: 234	This is a Dayco # 5060445. I think 44.5" long. I ran this with the set-up you are talking about. Should also work with UD pullies. Keep in mind the WP should be a clockwise spinning pump. Your 88 will be counter-clockwise. Unless you have the idler pulley on the dr. side of the motor, then dis-regard all info. My set-up is three pullies and alt. idler arm. The tensioner is very close to it's limits, but it works fine. ------------------ 82 Mercury Capri 302. Comp. Cams Tremec 3550 3.73's 12.8@106 N/AKevin's Capri [This message has been edited by shovelnose (edited 04-24-2001).]