Big Set Back

Silver5.0 · 06-20-2002, 01:04 AM

Well I had a tire blow out on me and went into a curb going 40mph it was either the curb or a car so, you know what I did an here I am I hit the back right so drivers back and so far I've found I've wrecked my axle,the pin that holds the axle togther in the rearend including the rearend spider gears,bearings the carrier, the pin slotted it's self into the carrier it made it's self another hole. Also the rim, tire brake drum. The 3.73's look fine though. Well I'm lookin for a new differenial if anybody knows where that would be great, would need a good deal. Also putting like the powertrax or auburn or eaton less slip replace that carrier because I need a whole new carrier the thing that holds the spider gears. Also any axles for good price anywhere. Thanks everybody.

cyberstang5.0 · 06-20-2002, 06:40 AM

Man, that really sucks. Sorry to hear about your accident

I would recomend getting the Auburn carrier. I have a posi in mine, and love it

I got mine from Ford. Check out some junk yards and see if you can pull the whole rear end out.

Rick 91GT · 06-20-2002, 08:10 AM

I would suggest getting a new carrier/axle package from Drivetrain Direct www.drivetraindirect.com The Eaton kit is the best out for a street car IMO carbon fiber clutches and the unit is fully rebuildable unlike some Auburns that use cones. You can get a complete kit with axles, carrier, bearings, seals and all for $550. They advertise in MM&FF as well check them out. I would have the gears inspected if everything else is damaged there is a very good chance the gears are also bent or cracked, you can get new ones fairly cheap from Drivetrain Direct or Strange sells their gears for $159.

It could have been much worse, good luck!

jerrys84 · 06-20-2002, 12:17 PM

that sux, i would do what cyberstang sed, check with salvage yards, they should have what you need..

i see carriers all the time on ebay, and occasionally axles..

could of been worse..

good luck..

90LxDroptop · 06-20-2002, 04:17 PM

Same thing happened to me man, except I wasn't going that fast, only about 15 mph. I got my axles from a salvage yard. check that out, you'll get your parts real cheap.

06-20-2002, 01:04 AM	#1
Silver5.0 Registered Member Join Date: Aug 2001 Location: Mukilteo,Wa,U.S. Posts: 53	Big Set Back Well I had a tire blow out on me and went into a curb going 40mph it was either the curb or a car so, you know what I did an here I am I hit the back right so drivers back and so far I've found I've wrecked my axle,the pin that holds the axle togther in the rearend including the rearend spider gears,bearings the carrier, the pin slotted it's self into the carrier it made it's self another hole. Also the rim, tire brake drum. The 3.73's look fine though. Well I'm lookin for a new differenial if anybody knows where that would be great, would need a good deal. Also putting like the powertrax or auburn or eaton less slip replace that carrier because I need a whole new carrier the thing that holds the spider gears. Also any axles for good price anywhere. Thanks everybody.

06-20-2002, 08:10 AM	#3
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	I would suggest getting a new carrier/axle package from Drivetrain Direct www.drivetraindirect.com The Eaton kit is the best out for a street car IMO carbon fiber clutches and the unit is fully rebuildable unlike some Auburns that use cones. You can get a complete kit with axles, carrier, bearings, seals and all for $550. They advertise in MM&FF as well check them out. I would have the gears inspected if everything else is damaged there is a very good chance the gears are also bent or cracked, you can get new ones fairly cheap from Drivetrain Direct or Strange sells their gears for $159. It could have been much worse, good luck! __________________ *D/R 10108 NMRA Drag Radial, 25.5 chassis, F1R* *Check out RNH Performance Performance Engines and Custom Fabrication.* *From Mild to Wild we can build what you want, when you want it.* FOR SALE Stainless Steel Torque Box Supports

06-20-2002, 12:17 PM	#4
jerrys84 Registered Member Join Date: Feb 2002 Location: minnesota Posts: 129	that sux, i would do what cyberstang sed, check with salvage yards, they should have what you need.. i see carriers all the time on ebay, and occasionally axles.. could of been worse.. good luck.. __________________ 91 LX 'work in progress' previous stangs; lightly modded 84GT 81 2.3 converted to 302 auto

06-20-2002, 04:17 PM	#5
90LxDroptop Registered Member Join Date: Jun 2001 Location: Arlington Hts. IL Posts: 315	Same thing happened to me man, except I wasn't going that fast, only about 15 mph. I got my axles from a salvage yard. check that out, you'll get your parts real cheap. __________________ 90 LX Convertible 5.0 AOD 3.73 Gears, Underdrive Pulleys, TransGo shift kit, A servo, Subframe Connectors, o/r h-pipe, 2 chamber flows, Pony Wheels

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
I'm back.....And still Crazy.	Mercury	Blue Oval Lounge	14	10-30-2002 02:41 AM
I'm back, anyone miss me?	rustang girl	Blue Oval Lounge	18	10-10-2002 11:34 PM
Back in the Game......	1969Mach1	Blue Oval Lounge	27	10-08-2002 10:56 PM
Back from the Track - Good News/Bad News with Diablo	apenn	Modular Madness	1	09-22-2002 02:50 AM

06-20-2002, 06:40 AM	#2
cyberstang5.0 347ci of HORSE POWER!!! Join Date: Jul 2001 Location: Houston, TX Posts: 1,416	Man, that really sucks. Sorry to hear about your accident I would recomend getting the Auburn carrier. I have a posi in mine, and love it I got mine from Ford. Check out some junk yards and see if you can pull the whole rear end out.