BREAKING IN MY 4.10'S???

joey50gt · 04-24-2001, 03:26 PM

hey guys i am geting my 4.10's put in tommorow morning and i will be geting it back after school on the same day.
Do i need to break the gears in or can i go at it as soon as i get my car back?
If i do need to break them in how many miles do i need to put on them before i rag on them?
thanks for any help ahead of time

1HOTGT · 04-24-2001, 03:58 PM

You do need to break them in. If memory serves correctly.......this is what I did:

Didn't get on it when I picked it up.

Kept it at/under 55mph.

Being that I live 70 miles away from where they were installed. I pulled over after 30 minutes to let them cool off for 15-20 minutes.

I repeated this regimen for 200 miles (only took another day to accumulate 200 miles as I work 75 miles away!).

I got this break-in schedule from a link someone posted on the Corral.net.

Smokedawg · 04-24-2001, 05:19 PM

Man..75 mile drive to work and you put 4:10's in..you must be playin rich man game!

------------------
347 Stroker Motor: Balanced, A9P Computer, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley Fuel Regulator, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 79mm Mass Air Unit, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors

1HOTGT · 04-24-2001, 05:38 PM

I'm a consultant....I go "where the wind blows me"...

Actually, the 'Stang is just for the weekends. I was driving it for that whole month because my daily driver was getting a new engine put in it (dealer took FOREVER to put in the new engine).

Get this, though. My daily driver is a Ford Expedition! Soooooo......lately, I've parked the truck due to gas prices and drive the 'Stang to work. Only a little better gas mileage, but still bad.

I'm used to cruising along at @80mph, though, which SUCKS with 4:10's.

*sigh*....Hopefully, when I swap in the T-5, I can tone it down a bit with some 3:73's. Then again, it is a 'vert so maybe I'll stick with the 4:10's

04-24-2001, 06:02 PM

I've seen numerous people put gears in, back it off the trailer and bang gears all night. I think that's a myth.

Have fun-

WADS56 · 04-25-2001, 12:21 AM

Quote:

Originally posted by 1HOTGT:
You do need to break them in. If memory serves correctly.......this is what I did:

Didn't get on it when I picked it up.

Kept it at/under 55mph.

Being that I live 70 miles away from where they were installed. I pulled over after 30 minutes to let them cool off for 15-20 minutes.

I repeated this regimen for 200 miles (only took another day to accumulate 200 miles as I work 75 miles away!).

I got this break-in schedule from a link someone posted on the Corral.net.

That is what Richmand says to do for a street car. If it is a drag car you can put them in and go.

------------------
347 W/ A-trim 6#'s, Canfield heads, out of the box Systemax II intake, solid roller cam. 11.1 @123mph

93lx 5.0 daily driver

Josh91 · 04-25-2001, 11:56 AM

I went out and romped mine only a few blocks from the shop. That was a year and several thousand miles ago and no problems at all, not even gear whine.

------------------
1991 Mustang GT - Cobra Intake, FMS 65mm TB, C&L 73mm MAF, GT-40P heads, Crane 2031 cam, Crane 1.7rr, Built AOD, Art Carr 2400 non-lockup converter, Transgo shift kit, BBK chrome cold air, FMS 'P' headers, Pacesetter off-road H, BBK aluminum pulleys, 2-C Flows w/ dumps, FMS 4.10's, Steeda STB, StangNet LCA's, for now...

<A HREF="http://www.geocities.com/motorcitymustang/gt40p.html" TARGET=_blank>The Original G

04-24-2001, 03:26 PM	#1
joey50gt Registered Member Join Date: Jan 2001 Location: hurst,texas,america Posts: 95	BREAKING IN MY 4.10'S??? hey guys i am geting my 4.10's put in tommorow morning and i will be geting it back after school on the same day. Do i need to break the gears in or can i go at it as soon as i get my car back? If i do need to break them in how many miles do i need to put on them before i rag on them? thanks for any help ahead of time

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
4.10s! A scientific study...sort of	xxxBlakexxx	Modular Madness	5	04-09-2004 06:28 PM
I mpressed with my 4.10's	joey50gt	Windsor Power	0	05-03-2001 09:45 PM
Speedo gear for 4.10s Anyone??	Chipdog	Windsor Power	2	04-29-2001 08:32 PM
Should I swap in 4.10's for my 3.73's- please read	Killercanary	Windsor Power	15	03-27-2001 10:57 PM
4.10's on the street...	STEEDA85GT	Windsor Power	11	03-09-2001 05:58 AM

04-24-2001, 03:58 PM	#2
1HOTGT Registered Member Join Date: Apr 2001 Location: Chicago, IL Posts: 12	You do need to break them in. If memory serves correctly.......this is what I did: Didn't get on it when I picked it up. Kept it at/under 55mph. Being that I live 70 miles away from where they were installed. I pulled over after 30 minutes to let them cool off for 15-20 minutes. I repeated this regimen for 200 miles (only took another day to accumulate 200 miles as I work 75 miles away!). I got this break-in schedule from a link someone posted on the Corral.net.

04-24-2001, 05:19 PM	#3
Smokedawg Tires Fear Me... Join Date: Jan 2001 Posts: 867	Man..75 mile drive to work and you put 4:10's in..you must be playin rich man game! ------------------ 347 Stroker Motor: Balanced, A9P Computer, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley Fuel Regulator, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 79mm Mass Air Unit, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Short Throw Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors

04-24-2001, 05:38 PM	#4
1HOTGT Registered Member Join Date: Apr 2001 Location: Chicago, IL Posts: 12	I'm a consultant....I go "where the wind blows me"... Actually, the 'Stang is just for the weekends. I was driving it for that whole month because my daily driver was getting a new engine put in it (dealer took FOREVER to put in the new engine). Get this, though. My daily driver is a Ford Expedition! Soooooo......lately, I've parked the truck due to gas prices and drive the 'Stang to work. Only a little better gas mileage, but still bad. I'm used to cruising along at @80mph, though, which SUCKS with 4:10's. sigh....Hopefully, when I swap in the T-5, I can tone it down a bit with some 3:73's. Then again, it is a 'vert so maybe I'll stick with the 4:10's

04-24-2001, 06:02 PM	#5
9Cobra5 Guest Posts: n/a	I've seen numerous people put gears in, back it off the trailer and bang gears all night. I think that's a myth. Have fun-

04-25-2001, 11:56 AM	#7
Josh91 Registered Member Join Date: Nov 1998 Location: Salina, KS Posts: 83	I went out and romped mine only a few blocks from the shop. That was a year and several thousand miles ago and no problems at all, not even gear whine. ------------------ 1991 Mustang GT - Cobra Intake, FMS 65mm TB, C&L 73mm MAF, GT-40P heads, Crane 2031 cam, Crane 1.7rr, Built AOD, Art Carr 2400 non-lockup converter, Transgo shift kit, BBK chrome cold air, FMS 'P' headers, Pacesetter off-road H, BBK aluminum pulleys, 2-C Flows w/ dumps, FMS 4.10's, Steeda STB, StangNet LCA's, for now... <A HREF="http://www.geocities.com/motorcitymustang/gt40p.html" TARGET=_blank>The Original G