WHAT PARTS HAVE YOU BROKEN??

NO SLO PK · 01-13-2001, 01:00 AM

So what parts have you broken? My list of broken parts includes:

2 T-5 trannys.
4 Blowers (different head units)
2 Head gaskets, blown after detonation
1 Hood (drove off with it unlatched...doh!)
1 BFG Tire, flat spotted during a skid
1 Clutch Cable, melted against header
3 Power steering pumps, broken due to Whipplecharger
1 Power steering rack, failed with p/s pump
2 AC compressors, broken from Whipple also
4 Alternators, they don't like to rev.
1 Intercooler, bent after going off track

------------------
'91 LX
Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

MiracleMax · 01-13-2001, 01:40 AM

1 drive side cylinder head
1 engine block
1 AC pump
1 Alternator bracket
1 connecting rod
1 piston
2 AOD tranny's
1 stock 8.8
1 floor pan

90dpscoupe · 01-13-2001, 01:53 AM

Man, you guys are deppressing me, but if this counts, i broke a fan-clutch, then it sent the fan through the radiator, but so far i been alright, kinda leary about my t-5 though.

------------------
90 lx coupe: Mac cold air fenderwell, accel supercoil,advncd ignition,3-core radiatr, FMS alum D/S, Black magic fan, 3.27grs, 3chbr flows.
Best time: 14.20(on 225/60/15 firehawks)
Best mph 97.80
Best 60' 2.1
next mods: subframes, 3.73's

SKYWLKR · 01-13-2001, 01:56 AM

HA ametures.

1 block
2 8.8 rears
4 T-5 maybe 5 it kinna making a clicking sound
2 alternators
1 E7TE head
several valves
1 oilpan
1 PS pump
3 97 cobra rims
1 hood
1 winsheild
1 barbed wire fence (off track excursion)
1 front bumper cover "
2 brand new GSC's, flat spots, still working on smoothing them
several melted plugs
1 FMS drive shaft
1 BBK clutch quad
1 March ram air kit
2 K&N's

Well I think I'll stop before I get depressed.

I ya aint breakin parts ya aint driving it!!!

------------------
A.K.A. The LS1 Eater http://members.aol.com/jeauxmoe/index.html 5.0 lx,performer heads, GT-40 intake,JBA headers,stock cam and TB to name a few. 12.3@111.7 w/a 1.70 60ft 13.002 @109.8 on street tires w/a 1.96* 60 ft.

Update 11.89@115 1.63 60ft

NoSlow5.0 · 01-13-2001, 07:30 AM

Oh sh1t, here we go!

1 fog light
2 quarter panels
1 hood
1 front frame core
1 clutch quadrent
1 heater core
1 radiator
1 tachometer
1 wheel lug

I'm sure there are more, i'm just too tired to think of them now

Light Em Up!!

bcinyuz · 01-13-2001, 08:02 AM

4-engines
2-trannys T-5s
2-water pumps
2-driveshafts
2-sets of clutch disks
1-powersteering pumps
1-edlebrock lower intake
1-BBK 65mm throttle body
1-1986 Ford Mustang GT (I had to KILL it before it KILLED me.)

White GT · 01-13-2001, 09:05 AM

I've broken a lot of part to. But i'm not asking them because my girl friend are reading this board to

. Just asking about a fog lamp. Some parts trim and a lot of tools. I'ld never known how good tools are not a waste of money before i bought this wild pony.

And all after that i'll rather pushing a ford than driving a Chevy

------------------

88 GT, K&N, Home Made Ram Air, Convertible Engine Mount, Dynomax Super Turbo, 180° thermostat, Energy sway bar bushings, Strut tower brace.
*** And Risen from the dead ***

My GT

My Web Page

Five0 · 01-13-2001, 10:06 AM

5 t5's

1 u-joint

1 stock clutch cable

3 of the 4 lugs on the left rear tire (a little accident with a rr crossing at about 90 mph, I was determined to win that race.

2 brand new tires from doing a burnout on rough pavement.

1 used tire from a burnout till one popped

Scratches on finder from popping 1 tire during a burnout.

All in my 88, nothing in my 91 lx yet.

------------------
James Cox
nochevy@hotmail.com
1991 Mustang LX
Best 1/8 time on motor 7.686 @90.20mph

Skyman · 01-13-2001, 05:54 PM

You guys are abusive! I havn't broken a damn thing!

How do you break a K/N btw?

Skyler

------------------
-1989 Saleen Mustang #406-
TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft.

On its way: Paxton Sn-89 with dyno tuning and long tubes.

Just added: B&M Ripper, Weldin Subframes, & Turn downs!
13.2@106mph

Fox Body · 01-13-2001, 10:18 PM

When I had the V6, I broke the thermostat housing 3 times.

“…because, no one’s really gonna be free until nerd persecution ends.” ---Revenge of the Nerds

-------------------------------
'79 Mustang Coup
4" Cowl
Weld wheels (15x6;15x8)
Stock 5.8L
C4 w/ shift kit
1.5" MAC full length headers
Holley 750 CFM
Edelbrock intake
2.5" Off road H-pipe
8.8" Rear end w/ 2.73:1 gears (sucks!) (awaiting installation of 3.55s)
Front: 225/60/15 Rear: 255/60/15 Eagle GT II
Sucky Purolator air filter that's choking my car.

1989GT · 01-14-2001, 03:47 PM

Hmm lets see...
1 clutch(broke after 2,000 miles)
1 shift knob(pulled it off on a 1-2 shift, no more threads

)
2 fuel injectors
1 water pump bolt
2 oil pan bolts(POS torque wrench)
1 distributor gear
1 oil pump drive shaft
1 EEC IV(fried some how)
1 motor(#2 cylinder died, 192,000 miles)
1 drivers side seat bolt(pulled out of the floor)
Well that's all I can think of for now.

------------------
89GT,T-5Z, D.S.S. 306 shortblock w\main support, B-303 cam, Cobra intake, GT40P heads, 1.72rr, MAC "P" headers, MAC off-road H-Pipe, MAC true-fit w\tips, 373's...and the list goes on!
Throttle Junkie Powered by Ford!
12.824 @ 107.05 MPH

Desperado · 01-14-2001, 04:01 PM

2 liberty 5 speeds
1 t56
14 clutches
1 flywheel (billet steel)
2 8.8 rears
1 floor pan (no sub frame connectors on slicks and nos)
1 sun roof (same reason)
1 78 camaro (road misshap)
2 quarter pannels (camaro thing)
1 block (good parts are a must, hard lesson)
now i got a new car and am spending the time and money to do it right. The good parts are worth their weight in gold. Scattershields a must. By the way t56 don't have any yet

01-13-2001, 01:00 AM	#1
NO SLO PK Registered Member Join Date: Mar 1999 Location: Arcadia, CA, USA Posts: 731	WHAT PARTS HAVE YOU BROKEN?? So what parts have you broken? My list of broken parts includes: 2 T-5 trannys. 4 Blowers (different head units) 2 Head gaskets, blown after detonation 1 Hood (drove off with it unlatched...doh!) 1 BFG Tire, flat spotted during a skid 1 Clutch Cable, melted against header 3 Power steering pumps, broken due to Whipplecharger 1 Power steering rack, failed with p/s pump 2 AC compressors, broken from Whipple also 4 Alternators, they don't like to rev. 1 Intercooler, bent after going off track ------------------ '91 LX Procharger, 3 row intercooler, extrude honed Cobra intake, Mac full Length Headers, 30# inj., 73mm C&L, 75mm tb, E303 cam, 289 rods, ported E7 heads, MSD, T-Rex w/255 lph Walbro, 5 lug conversion, Cobra R wheels, 3.27 gears and Moser Axles.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Which is your favorite general auto parts store?	Fox Body	Blue Oval Lounge	28	12-07-2017 11:18 AM
Trading Notch for parts	Coupe Devil	Blue Oval Lounge	3	04-20-2002 12:58 PM
My Good Experience With Ford Parts On Line - Good Discounts	Maroon 5.0 LX	Blue Oval Lounge	1	10-03-2001 09:46 AM
What parts have you broken?	jonnyk	Blue Oval Lounge	14	06-04-2001 10:29 PM
What would these parts be worth?	2FastLX	Blue Oval Lounge	3	03-13-2001 09:11 AM

01-13-2001, 01:40 AM	#2
MiracleMax Registered Member Join Date: Apr 1999 Location: Hayes, Va, USA Posts: 798	1 drive side cylinder head 1 engine block 1 AC pump 1 Alternator bracket 1 connecting rod 1 piston 2 AOD tranny's 1 stock 8.8 1 floor pan

01-13-2001, 01:53 AM	#3
90dpscoupe Registered Member Join Date: Jun 2000 Location: sanantonio, Tx, usa Posts: 1,407	Man, you guys are deppressing me, but if this counts, i broke a fan-clutch, then it sent the fan through the radiator, but so far i been alright, kinda leary about my t-5 though. ------------------ 90 lx coupe: Mac cold air fenderwell, accel supercoil,advncd ignition,3-core radiatr, FMS alum D/S, Black magic fan, 3.27grs, 3chbr flows. Best time: 14.20(on 225/60/15 firehawks) Best mph 97.80 Best 60' 2.1 next mods: subframes, 3.73's

01-13-2001, 01:56 AM	#4
SKYWLKR Registered Member Join Date: May 1999 Posts: 103	HA ametures. 1 block 2 8.8 rears 4 T-5 maybe 5 it kinna making a clicking sound 2 alternators 1 E7TE head several valves 1 oilpan 1 PS pump 3 97 cobra rims 1 hood 1 winsheild 1 barbed wire fence (off track excursion) 1 front bumper cover " 2 brand new GSC's, flat spots, still working on smoothing them several melted plugs 1 FMS drive shaft 1 BBK clutch quad 1 March ram air kit 2 K&N's Well I think I'll stop before I get depressed. I ya aint breakin parts ya aint driving it!!! ------------------ A.K.A. The LS1 Eater http://members.aol.com/jeauxmoe/index.html 5.0 lx,performer heads, GT-40 intake,JBA headers,stock cam and TB to name a few. 12.3@111.7 w/a 1.70 60ft 13.002 @109.8 on street tires w/a 1.96* 60 ft. Update 11.89@115 1.63 60ft

01-13-2001, 07:30 AM	#5
NoSlow5.0 YOU HAVE NO MARBLES!!!!!! Join Date: Aug 2000 Location: Jonesboro,Georgia,USA (Providence, Ri) Posts: 868	Oh sh1t, here we go! 1 fog light 2 quarter panels 1 hood 1 front frame core 1 clutch quadrent 1 heater core 1 radiator 1 tachometer 1 wheel lug I'm sure there are more, i'm just too tired to think of them now Light Em Up!!

01-13-2001, 08:02 AM	#6
bcinyuz Registered Member Join Date: Aug 2000 Location: lodi,ca,usa Posts: 86	4-engines 2-trannys T-5s 2-water pumps 2-driveshafts 2-sets of clutch disks 1-powersteering pumps 1-edlebrock lower intake 1-BBK 65mm throttle body 1-1986 Ford Mustang GT (I had to KILL it before it KILLED me.)

01-13-2001, 09:05 AM	#7
White GT Registered Member Join Date: Nov 1999 Location: At the north of the Maine Posts: 177	I've broken a lot of part to. But i'm not asking them because my girl friend are reading this board to . Just asking about a fog lamp. Some parts trim and a lot of tools. I'ld never known how good tools are not a waste of money before i bought this wild pony. And all after that i'll rather pushing a ford than driving a Chevy ------------------ 88 GT, K&N, Home Made Ram Air, Convertible Engine Mount, Dynomax Super Turbo, 180° thermostat, Energy sway bar bushings, Strut tower brace. * And Risen from the dead * My GT My Web Page

01-13-2001, 10:06 AM	#8
Five0 Registered Member Join Date: Apr 2000 Location: middleburg, fl, usa Posts: 1,134	5 t5's 1 u-joint 1 stock clutch cable 3 of the 4 lugs on the left rear tire (a little accident with a rr crossing at about 90 mph, I was determined to win that race. 2 brand new tires from doing a burnout on rough pavement. 1 used tire from a burnout till one popped Scratches on finder from popping 1 tire during a burnout. All in my 88, nothing in my 91 lx yet. ------------------ James Cox nochevy@hotmail.com 1991 Mustang LX Best 1/8 time on motor 7.686 @90.20mph

01-13-2001, 05:54 PM	#9
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	You guys are abusive! I havn't broken a damn thing! How do you break a K/N btw? Skyler ------------------ -1989 Saleen Mustang #406- TFS Heads, Edelbrock intake, E-303, 3.73's, 1 5/8 shortys, Offroad-H, 2chamber flows, 36psi FPR, 15degrees timing, 70mm tb, 73mm maf, 24lb inj, Crank pulley, MSD6A, Alum driveshaft. On its way: Paxton Sn-89 with dyno tuning and long tubes. Just added: B&M Ripper, Weldin Subframes, & Turn downs! 13.2@106mph

01-13-2001, 10:18 PM	#10
Fox Body Mustang Maniac Join Date: Sep 2000 Location: GA, U.S.A Posts: 2,266	When I had the V6, I broke the thermostat housing 3 times. “…because, no one’s really gonna be free until nerd persecution ends.” ---Revenge of the Nerds ------------------------------- '79 Mustang Coup 4" Cowl Weld wheels (15x6;15x8) Stock 5.8L C4 w/ shift kit 1.5" MAC full length headers Holley 750 CFM Edelbrock intake 2.5" Off road H-pipe 8.8" Rear end w/ 2.73:1 gears (sucks!) (awaiting installation of 3.55s) Front: 225/60/15 Rear: 255/60/15 Eagle GT II Sucky Purolator air filter that's choking my car.

01-14-2001, 03:47 PM	#11
1989GT Registered Member Join Date: Apr 1999 Location: Cincinnati,OH Posts: 1,511	Hmm lets see... 1 clutch(broke after 2,000 miles) 1 shift knob(pulled it off on a 1-2 shift, no more threads ) 2 fuel injectors 1 water pump bolt 2 oil pan bolts(POS torque wrench) 1 distributor gear 1 oil pump drive shaft 1 EEC IV(fried some how) 1 motor(#2 cylinder died, 192,000 miles) 1 drivers side seat bolt(pulled out of the floor) Well that's all I can think of for now. ------------------ 89GT,T-5Z, D.S.S. 306 shortblock w\main support, B-303 cam, Cobra intake, GT40P heads, 1.72rr, MAC "P" headers, MAC off-road H-Pipe, MAC true-fit w\tips, 373's...and the list goes on! Throttle Junkie Powered by Ford! 12.824 @ 107.05 MPH

01-14-2001, 04:01 PM	#12
Desperado Registered Member Join Date: Mar 1999 Location: dallas, tx United states Posts: 20	2 liberty 5 speeds 1 t56 14 clutches 1 flywheel (billet steel) 2 8.8 rears 1 floor pan (no sub frame connectors on slicks and nos) 1 sun roof (same reason) 1 78 camaro (road misshap) 2 quarter pannels (camaro thing) 1 block (good parts are a must, hard lesson) now i got a new car and am spending the time and money to do it right. The good parts are worth their weight in gold. Scattershields a must. By the way t56 don't have any yet