budget build...

slo95 · 06-05-2002, 09:35 PM

while my heads are off...thinking of this to my 95 GT

port/polished/3* valvejob E7's, steeda 19 cam, 1.6rr's, TF/FRPP/Edel intake

already done
65mm TB, 73mm MAF, full (prochamber) exhaust, 3.73, and pullies

any idea what the heads/cam/intake will gain?
or, stick with above and stock cam with 1.7rr's to get ?

thanks

srv1 · 06-05-2002, 10:14 PM

go with GTP heads and a cobra intake, 24lbs, 75 mass, 1.7's stock cam or maybe E for stickand a 65mm. i believe that would get you around 300. not sure though. someone her has this combo and i cant remember who. hope they step forward.

06-05-2002, 09:35 PM	#1
slo95 Registered Member Join Date: Dec 2000 Posts: 168	budget build... while my heads are off...thinking of this to my 95 GT port/polished/3* valvejob E7's, steeda 19 cam, 1.6rr's, TF/FRPP/Edel intake already done 65mm TB, 73mm MAF, full (prochamber) exhaust, 3.73, and pullies any idea what the heads/cam/intake will gain? or, stick with above and stock cam with 1.7rr's to get ? thanks

06-05-2002, 10:14 PM	#2
srv1 Get down..... Join Date: Apr 2001 Location: Room 103 Posts: 2,095	go with GTP heads and a cobra intake, 24lbs, 75 mass, 1.7's stock cam or maybe E for stickand a 65mm. i believe that would get you around 300. not sure though. someone her has this combo and i cant remember who. hope they step forward. __________________ Cobra brakes are on! Finally..... ------------------------------------------------

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Budget 302 (I mean budget)	BLOCKER	Windsor Power	4	08-12-2004 04:40 AM
347 Stroker Vs. 302 Build up	5.0 Pony	Windsor Power	19	02-27-2003 09:58 PM
budget build	BLOCKER	Windsor Power	4	01-12-2003 04:10 PM
Did you build you own house and garage??	joakim	Blue Oval Lounge	1	05-05-2002 12:44 PM