MustangWorks.com : Ford Forums - View Single Post

Barry Jackson · 06-10-2003, 08:14 AM

I am running similar set up to yours, however with 750 carb. My heads are suppose to be 351W with 3 angle valve job, w/ 180-154 valves. Will you have to notch your pistons with 2.02 valves? I am interested to hear how they work out for you.
Also, thinking of a set of 165 AFR's but they are pricy.
Thanks,

06-10-2003, 08:14 AM	#3
Barry Jackson Registered Member Join Date: Oct 1998 Location: Pitts. Pa. USA Posts: 61	82GT I am running similar set up to yours, however with 750 carb. My heads are suppose to be 351W with 3 angle valve job, w/ 180-154 valves. Will you have to notch your pistons with 2.02 valves? I am interested to hear how they work out for you. Also, thinking of a set of 165 AFR's but they are pricy. Thanks, __________________ 87 LX, 74 351W, performer plus intake, holley 750, vac sec., 78 prim. 80 sec., 50 pump: Wolverine cam 292-512, windsor heads, ported 3 angle valve, 4:10 rear, AOD, Lentech valve body w/ 10'' converter. No time slips yet!