![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
![]() |
#1 |
Guest
Posts: n/a
|
![]() You guys with the built engines and superchargers, I'm sorting this thing out.. still! What blower are you running(and type.. a,b,s,t trim) and what is your combo? I'm looking for fuel pressure(Mines at 39 for now), timing(stock on mine), do you have a timing retard(I don't yet)? If so what is it set at? What plugs do you run? I'm looking for specifics. Does your car detonate at all? Do you have a custom chip?
I can get a deal($50) on a timing retard but was thinking it would be wasted when I go to get a chip burnt. I'd like to know what you guys have so I can use that info to screw around with mine alittle more. I had less fuel pressure(35) but I felt I needed more and thought 45 psi would be about right... that was too rich but was better(less detonation) so I backed it off some(39). It still detonates but not as bad as 35 psi. Thanks for any info.. ------------------ Rick My 89lx(updated 11/5/2000) My 97 Cobra |
![]() |
![]() |
#2 |
Registered Member
Join Date: Aug 2000
Location: Bountiful, UT
Posts: 91
|
![]() I went with a chip and I hated it. Go with a MSD6-BTM or the crane HI-6TRC. These have a detonation protection, it shuts off every other injector so you won't hurt anything. (hopefully) I sent my fuel at 40 with a FMU.
plugs are hard to talk about because theres so many and heat types. I run the cheap Autolites. I found that any of the splitfire or any of the other like this makes my set up run like sh*t. just my 2c ------------------ 89 LX Supercharged DSS 357, 11 lbs Powerdyne, Downs Box intake, ported GT-40x heads, lockwired, Crane Cam 1.6 rockers, Crower cam, Oil cooler, Moroso oil evac kit, Taylor 10mm wires, MAC 70mm T/B, 30lb injectors, Vortech fuel rails, Pro M 75mm Mass air, Vortech T-Rex Fuel pump, 255lph intank pump, K&N, Cobra R radiator MSD6-BTM, Lakewood bellhousing, Tremec Trans, Pro 5.0 shifter, MAC headers and X-pipe, Dynomax race mufflers. Dyno at 556hp to the wheels. |
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
![]() You hated the custom chip? Why??
|
![]() |
![]() |
#4 |
Registered Member
Join Date: Nov 2000
Location: detroit,mi
Posts: 27
|
![]() Put your base timming at 10 degrees, and leave the fuel pressure at 45. Try a colder plug a NGK FR5 is factory for that, so try a Autolite 3923, it is 1 step colder if that dosen't work try a NGK r5671-7 plug. I run 12psi with no retard or FMU with 36lbs injectors. Maybe your injectors aren't big enough.
|
![]() |
![]() |
![]() |
#5 |
Registered Member
Join Date: Jan 2001
Location: sandston, va.
Posts: 12
|
![]() Well i ran 12.0 at 115 with my A-trim before upgrading with about 9#'s of boost at 5200, race weight at 3300# with me. Here is my set-up:
-base timing at 15-16 degrees, take extra out via BTM if you get it...it helps alot. With the timing up that high, you have an awesome bottom end and yet still retain great topend as boost comes in. -TPS to 1.1-1.2 volts, key on car off -I don't have a fuel gauge that i can watch under boost but i think it is still set at 43#'s at no vacuum I ran the autolite 23's, one step colder No chip and have FMU, i think 8:1 for 24# injectors?? Can't remember but it is the right one. As long as i ran 93 and not crappy "supposed" to be 93 i never got detonation. I ran it this way at the track too. You might think the TPS should be below 1 volt but trust me, it seems the higher i put mine as well as my boss(March issue of 5.0, "Trading Places") does, the better our cars run. Hope this helps. Oh and yes the MSD BTM is worth it, other wise you have to leave your stock timing down so it won't advance too much topend and induce detontation. Jarrod ------------------ ![]() 87GT Vortech S-trim, 155intank pump, 24# injectors, 75mm pro-m, cobra intake, exhaust, 3.73's, mega bite jr's, Central coastal mustangs drag springs and some other freebies. |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Fuel Pump Pressure? | Swarzkopf1 | Windsor Power | 3 | 08-31-2004 02:07 PM |
Looking to buy and I need Advice...Fuel Pressure Test Gage and Compression Test Gage | MTU 50 | Windsor Power | 3 | 10-18-2002 05:34 PM |
fuel pressure issue | avbcon12 | Windsor Power | 7 | 06-04-2002 06:16 PM |
Rising Fuel Pressure with Rising RPM? | StreetStang37 | Windsor Power | 1 | 05-21-2002 03:49 AM |
Vapor Lock | 67 shadetree mechanic | Classic Mustangs | 11 | 05-18-2001 10:01 PM |