![SEARCH](http://www.mustangworks.com/images/search.png)
![The Mustang Works](http://www.mustangworks.com/images/mw_footer_logo.gif)
© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
![]() |
#1 |
gear banger
Join Date: Aug 2000
Location: CHICAGO
Posts: 1,144
|
![]() I just got it installed and tested it out today. The gauge dosn't bounce around like people said they would. It has a stable reading all the time (idle, part throtal, wot). It's working because the gauge will change readings when I accelerate, and coast.
Why do I have a feeling that my car never go's into open loop and takes readings from the 02's to correct the a/f raito. I have a custom chip burned for my setup, would this have anything to do with it? ------------------ 79 hatch w/ NA 347,stage 2 Canfield heads, out of the box Victor 5.0 intake, solid roller cam, Aeromotive fuel system, proshifted TKO II.MY CAR http://www.mustangworks.com/cgi-bin/...splay.cgi?1288 93lx all stock + tremec |
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Mar 1999
Location: Ventura, California
Posts: 8,981
|
![]() What does the gauge read when you first start it up (cold)? When idling (warm)? At half throttle (warm)? At full throttle (warm)?
Take care ~Chris ------------------ Retired Moderator MustangNet My site: JimPorterRacing RACECAR spelled backwards is RACECAR HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!! |
![]() |
![]() |
![]() |
#3 |
gear banger
Join Date: Aug 2000
Location: CHICAGO
Posts: 1,144
|
![]() On start up it says it's lean, and will slowley climb up to stoitch as the engine warms up. When it is warm and idling it reads stoitch. At part throtal when warm it will stay stoich, but when there is a load on the motor it will move around a little but never go rich or lean. At wot it will move close to rich, but never get in the red (rich). When doing enging breaking it will go a little lean.
I have a custom chip burned for a blower combo, that would explain why it almost go's rich as the rpm's climb at wot. The car runs good no bucking or surging so it seems to be working corectly. |
![]() |
![]() |
![]() |
#4 |
gear banger
Join Date: Aug 2000
Location: CHICAGO
Posts: 1,144
|
![]() ?
|
![]() |
![]() |
![]() |
#5 |
Junior Member
Join Date: Mar 1999
Location: Ventura, California
Posts: 8,981
|
![]() Sounds like it's not going into closed loop.
Take care ~Chris ------------------ Retired Moderator MustangNet My site: JimPorterRacing RACECAR spelled backwards is RACECAR HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!! |
![]() |
![]() |
![]() |
#6 | |
He said Member...heh, heh
Join Date: Sep 1999
Location: Jupiter, Florida U.S.A.
Posts: 3,718
|
![]() Quote:
![]() ------------------ Joe! 1988 GT, 167,000 miles!!! 13.58@105mph Check out my listing! Click here! Or my website:www.joe4speed.com 99 Ninja ZX-6R:10.32@135mph! 1993 Olds Eighty Eight LSS 16.40@88.8mph ![]() |
|
![]() |
![]() |
![]() |
#7 |
Junior Member
Join Date: Mar 1999
Location: Ventura, California
Posts: 8,981
|
![]() Probably stoichiometric.
Take care ~Chris ------------------ Retired Moderator MustangNet My site: JimPorterRacing RACECAR spelled backwards is RACECAR HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!! |
![]() |
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
fuel gauge install | GhettoPop | Windsor Power | 4 | 01-23-2004 01:41 PM |
Truck acting weird | lovinspeed01 | Built Ford Tough | 2 | 04-27-2003 02:39 PM |
A/C Control panel..acting weird?! | fongo | Windsor Power | 2 | 03-22-2002 12:04 AM |
The benefits of a Vacuum Gauge!!! | PKRWUD | Windsor Power | 16 | 07-02-2001 09:12 PM |
ABS light acting weird | 96superstang | Modular Madness | 3 | 01-18-2001 10:34 PM |