Re: calling all the Go Fast guys from this board...help needed
Quote:
|
Originally Posted by Jeff Chambers
Worth every penny. Since you're adding better flowing heads and intake, a good cam will be able to make use of that extra breathing capability. I've run custom cams from Anderson, FTI, Bennet and Cam Motions. By far I've had better luck with the Anderson and Cam Motion cams. You'll get as much bolt-in horsepower increase from a custom cam as you will from bolting the heads and intake on.
|
thanks for all the advice, i'v made up my mind and when i get my tax check im gonna be giving anderson a call. i checked out the heads from fox lake, i'll be talking to them soon as well.
a little bit of good news i'll throw in, i took the time to clean the carbon off of my pistons, i knew that motor was a recent rebuild but what i found when i cleaned it was that every piston said .040 on it. so thats pretty cool.
once i make some more progress i'll start posting up pics, and hopefully by june i can have this thing on the street.
once again thanks for all the help everyone.
__________________
85 GT-currently: 8.8 with 4.10 and richmond spool, 31spline strange axles, Ties, GMS rear controll arms, stock rear springs, 50/50's, 90/10's up front with 4cyl springs, PA K-member and A-arms, and a motor i still cant decide what to do with.
|