Cam Choices

347powered · 09-07-2002, 07:25 PM

Anyone have any suggestions on a cam choice? Got a 347, 42lb injectors,70mm mas, trick flow upper and lower, track heat heads also trick flow, Also putting a 14lb Procharger, with a 3-core intercooler, the cam I have now isn`t very driver friendly! So any ideas would be REALLY helpful! Thanks alot for your time!! The cam I have now is, Intake dur is 284 lift is 544, exhaust is 294 lift is 573, 112 degree lobe center, 65 deg of overlap. The cam is Isky

HotRoddin · 09-07-2002, 07:45 PM

I like Comp Cams Xtreme Energy series. They are a fairly new design that gives you better vacume in the bigger street strip cams.

Mine is 230 - 236 @ .050 duration and .519 .523 lift, and its going in a 372 stroker. I know of a very similar setup to mine (which isn't done yet so i can't give you a personal report ) but the one i know of is making around 450 HP and its a streetable engine. What you have now sounds like an awful lot of cam for a streetable car ? Well i'm assuming its a street car ?

PS: it is 110 degree lobe sep.

SlowGT · 09-08-2002, 01:35 AM

I'm thinking about a 347 with the 14#procharger, too. I'm considering Lunati's 51017 - 276/286, 218/228, .536/.536", 112LC, and Lunati's 51028 - 285/291, 221/232, .526/.530", 112LC.

Right now I'm running 284/292, 218/226/, .504/.512", 112LC naturally aspirated and it works quite well. Thinking about putting the P1SC on this motor and finding out how the it works with this cam. May just transplant this cam to the 347. Don't have any dyno numbers to offer.

I think the overlap on the first 2 I mentioned are 0 and 4, respectively and 4 on the one I've got.

09-07-2002, 07:25 PM	#1 (permalink)
347powered Registered Member Join Date: Feb 2002 Location: Lafayette In. Posts: 14	Cam Choices Anyone have any suggestions on a cam choice? Got a 347, 42lb injectors,70mm mas, trick flow upper and lower, track heat heads also trick flow, Also putting a 14lb Procharger, with a 3-core intercooler, the cam I have now isn`t very driver friendly! So any ideas would be REALLY helpful! Thanks alot for your time!! The cam I have now is, Intake dur is 284 lift is 544, exhaust is 294 lift is 573, 112 degree lobe center, 65 deg of overlap. The cam is Isky __________________ 93 Lx tang, coast high performance 347 TF upper and lower,30lb injecters 70mm TB, 75 MAF, Tremec3550,3.73 gear.

09-08-2002, 01:35 AM	#3 (permalink)
SlowGT Registered Member Join Date: Jun 1999 Location: Columbia Co, PA Posts: 301	I'm thinking about a 347 with the 14#procharger, too. I'm considering Lunati's 51017 - 276/286, 218/228, .536/.536", 112LC, and Lunati's 51028 - 285/291, 221/232, .526/.530", 112LC. Right now I'm running 284/292, 218/226/, .504/.512", 112LC naturally aspirated and it works quite well. Thinking about putting the P1SC on this motor and finding out how the it works with this cam. May just transplant this cam to the 347. Don't have any dyno numbers to offer. I think the overlap on the first 2 I mentioned are 0 and 4, respectively and 4 on the one I've got. __________________ OldSlow GT NewSlow GT-->under construction Info PICS Latest Addition: 92 5spd Notch - 33k miles Bone stock (with air silencer & spare tire) 14.94 @ 94.2

Thread Tools
Show Printable Version Email this Page
Display Modes	Rate This Thread
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode	Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear End Choices	RoadWarrior	Windsor Power	5	08-30-2002 11:48 AM
supercharging choices	chiaronate	Windsor Power	13	07-09-2002 09:17 PM
choices choices	66StangGuy	Classic Mustangs	7	05-10-2002 03:03 PM
Why GOD, Why???? Tooo many choices!!!	jerryIII	Windsor Power	3	06-05-2001 12:06 AM
Plug choices?	slo95	Windsor Power	2	03-08-2001 08:52 PM

09-07-2002, 07:45 PM	#2 (permalink)
HotRoddin cranky old man Join Date: Sep 2001 Location: Longview Texas Posts: 683	I like Comp Cams Xtreme Energy series. They are a fairly new design that gives you better vacume in the bigger street strip cams. Mine is 230 - 236 @ .050 duration and .519 .523 lift, and its going in a 372 stroker. I know of a very similar setup to mine (which isn't done yet so i can't give you a personal report ) but the one i know of is making around 450 HP and its a streetable engine. What you have now sounds like an awful lot of cam for a streetable car ? Well i'm assuming its a street car ? PS: it is 110 degree lobe sep.

Sponsored Links