The Cam I bought for my 331...will it perform???

Hi, I am in the middle east and ordered (on line) a Comp Cams
.555/.565 224/232 @ .050 duration with 112 lobecenter....
my motor currently houses a .499/.510 221/225 @ .050 with 112 LC and I like the torque it makes and I was curious if this Comp Cams cam i ordered will wake the motor up more and that I will probably lose a little bit on the low end but not much....the compression is 9 to 1 because.....thanks!!!!

331
good rods
ross pistons (9 to 1 )
edelbrock rpm with 1 inch spacer
70mm throttle body
75 mm mass air
24lb injectors
AFR heads (185's)
4.10 gears
equal length headers (1 5/8)
high flow cats