© Copyright 1995 thru 2008 - The Mustang Works™. All Rights Reserved.
MustangWorks.com is designed and hosted by Aero3 Media.
MustangWorks.com is designed and hosted by Aero3 Media.
|
08-29-2002, 11:54 AM | #1 |
Guest
Posts: n/a
|
The Cam I bought for my 331...will it perform???
Hi, I am in the middle east and ordered (on line) a Comp Cams
.555/.565 224/232 @ .050 duration with 112 lobecenter.... my motor currently houses a .499/.510 221/225 @ .050 with 112 LC and I like the torque it makes and I was curious if this Comp Cams cam i ordered will wake the motor up more and that I will probably lose a little bit on the low end but not much....the compression is 9 to 1 because.....thanks!!!! 331 good rods ross pistons (9 to 1 ) edelbrock rpm with 1 inch spacer 70mm throttle body 75 mm mass air 24lb injectors AFR heads (185's) 4.10 gears equal length headers (1 5/8) high flow cats |
08-29-2002, 06:53 PM | #2 |
Registered Member
Join Date: Jun 2001
Location: Anderson, TX.
Posts: 166
|
Should work fine, it is just like mine just a hair smaller on the duration and lift. But very close. You see how mine is running. Just wait until I get the 4.10's and a tremec then it's on. I need to get some slicks too.
__________________
331 10:1, AFR 185's, TFS-R intake |
08-29-2002, 10:23 PM | #3 |
Registered Member
Join Date: Jun 1999
Location: Columbia Co, PA
Posts: 303
|
a friend of mine has the same cam in his DSS 306 topped with a heavily ported Holley systemax intake and Holley stage 3 heads infront of a T5 & 3.73s. A 70mm TB and a 75mm MAF. His car runs 13.10s @ 108 all day long on street tires. With entirely too much spinning I might add.
Personnally I think he could pull better than that if he'd get an rpm extender. I'm sure you'll be pleased with the cam. Especially with your extra cubes. |
08-30-2002, 04:29 AM | #4 |
Guest
Posts: n/a
|
sounds good to me
cool...sounds like that cam should work out then..thanks...I will be buying 1 more cam....I like to have a good assortment of cams because I like to see what pulls hard and what doesn't.
|
08-30-2002, 07:50 AM | #5 |
Registered Member
Join Date: Aug 1999
Location: Charlottesville, Va, USA
Posts: 328
|
Why not get a custom cam for your combo?
__________________
93 LX R331/AFR 205/Vic 5.0/? psi |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
"I BOUGHT AN ABUSE VICTIM"!!! | Dark_5.0 | Blue Oval Lounge | 26 | 03-24-2005 02:39 AM |
bought stang # 3, im addicted. lol | Crazy Horse GT | Blue Oval Lounge | 22 | 08-05-2003 10:45 PM |
Bought a product from the Dark Side! | fiveohpatrol | Blue Oval Lounge | 16 | 07-07-2002 04:50 PM |
I just bought a bike....boy, what fun!!! | SaleenGTS | Stang Stories | 7 | 04-23-2002 11:35 PM |
just bought first stang, need help, dont know much about this stuff | od0g1742 | Windsor Power | 11 | 10-15-2001 04:00 PM |