MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)

- Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)

- - Cam Specs????? (http://forums.mustangworks.com/showthread.php?t=44571)

F.O.M.O.C.O.

10-23-2004 09:36 PM

Cam Specs?????

Can someone tell me what the Cam Specs are on a factory 1992 5.0 H.O. roller are?

Capri306

10-24-2004 01:14 AM

Re: Cam Specs?????

I'm moving this to the Windsor Power Forum. Questions such as these belong there and will get a more rapid response. Thanks.

PKRWUD

10-24-2004 04:53 AM

Re: Cam Specs?????

Part # F1ZE-AA
Lift Int.: .278"
Lift Exh.: .278"
Dur. Int.: 276
Dur. Exh.: 266
Overlap: 39
Lobe Cent. Int.: 116
Lobe Cent. Exh.: 115

For what it's worth, the cam is the same as the '89-'90 HO cam, except the depth of the hole in the cam snout was increased.

Jeff Chambers

10-24-2004 08:35 AM

Re: Cam Specs?????

Note that the durations are at .003" lifter movement, not .050" advertised durations.

All times are GMT -5. The time now is 02:40 PM.