With your 1.7 rockers, that'll be like 226 duration & .500" lift, with only 112 lsa. You'll trade off a lot of low end, and emissions will be bad.
I'd get something made for the 1.7 rockers.
The crane 2031 cobra cam was designed for this application (214/220, 112lsa, .513/.529), and you can get the kit with springs for $205.
If you want something a little more aggressive, there's a comp cam extreme grind that would be great... but it'll cost a little more.
When you take the front off, you'll probably be surprised at how loose the timing chain is... for $30, a new one is essentially manditory.
The lifters might be alright, but it'd really suck if it started tapping on startup.
------------------
'89.5 5L LX, hatch, Medium Canyon Red, 155K Km (No winters), 5sp, 3.08, GT interior, a/c, Alpine CD, K/N, Crane PS91, Walbro 190 LPH, March Pulleys, Mr. Gasket 180 therm (HP balanced), 3 core rad, MarkVIII fan, Variflow controller, Polygraphite front bushings, FMS-5300B springs, 6 KYB's, 73mm Calipers, Maximum Motorsport 4pt chassis brace, Western Motorsport Racing's Sub-frame connectors. Re-ringed bottom end, conv. motor mounts, melling oil pump, FMS-C50 waterpump, GT40P heads (blended, polli
|