ok, sorry if this gets long, but i run a wolverine 1087(222/232dur, .510/.534lift) cam with my p heads, and i dont have everything sorted out, but so far i have trapped 105 and put 267hp and 293ft-lbs. to the wheels before i put an off road pipe on. i did some work on my heads, but it was minimal at best. my intake is mismatched, so i will make more power after i fix that prob. a friend of mine runs one of the crane cams, a 2031(his name on here is quick89gt if you wanna double check that, im not positive)with his P heads and he has only been able to trap 100mph, but obviously there are differences in our combos that make up for that. to squeeze every last ounce of power out of any combo, i feel a custom cam and experimentation is the only way to go. nick
------------------
1990lx coupe, 302, gt40p heads, wolv 1087 cam, 1.7rr's, 65mm tb, 75mm maf, comp box on top of cobra lower, anderson ford pms, full exhaust, drag type susp. and 3.55's. traps 105mph
|