Can a AODE get into the low 13s?

moponys · 07-22-2001, 11:01 PM

I have a 94 Mustang GT and have been wanting to go to the track for quite a while now. But every time I plan to go, something else comes up (wife/kids etc.)

Can someone check out my mods and tell me if it's possible for my AODE to get into the 13s or even low 13s? Please check mods under moponys in users rides.

Thanks in advance.

------------------

dinomite · 07-22-2001, 11:18 PM

hmmm, with the AOD, the sn95 weight, and the vert weight.....stock that would be like a mid 15, but you have heads, cam, intake and exhaust. i think you can hit 13s if you drive well. i would suggest that you get hooked up with your local mustang club (or just some friends) and rent out the track, you'll get lots of runs, instead of 2-3 if you go to open track. You know the AOD shuffle?

Skyman · 07-23-2001, 02:18 AM

what are your mods

------------------
-1989 Saleen Mustang #406-
TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20.
12.54@107.4 Motor
1.69 60'

dinomite · 07-23-2001, 12:09 PM

you can see his mods in users rides.

moponys - you should put your mods in your signature, click on "profile" up top

moponys · 07-23-2001, 12:25 PM

Here you go, I added my mods to my profile...

------------------
TFS twisted wedge heads, TFS street intake, Lunati cam .500/.510 218/226
BBK shorties, BBK 70mm tb, Pro-m 75mm, ASP pulleys, FMS 3:73, Transgo shiftkit
Flowmasters, Bassani x-pipe, K&N FIPK, FMS 1.6 roller rockers, 9mm wires,18" wheels w/street tires.

dinomite · 07-23-2001, 05:01 PM

i forgot to say that even if you do get to the 13s, that aod isn't gonna last long with that power....

moponys · 07-23-2001, 05:10 PM

Would a Precision Industries torque converter help the tranny or hurt it more?

Do you think I should get a Lentech tranny when mine gets trashed? Geez this car is a never ending money pit!!!When my kids feet start to grow and they need new shoes, I'm gonna have to modify their old shoes by cutting the fronts off and makine open toed sandals so their feet will fit in just so I'll have enough money for the Stang. Just Kidding...

fiveohpatrol · 07-23-2001, 06:27 PM

the converter will cause more heat in your tranny, which will cause more rapid wear, thats why people suggest a tranny cooler with the installation of the converter, everyone here will tell you to definately go with a lentech, they are supposedly the best, go with the converter and get some good tires and you MAY hit 12's, get the lentech and your there for sure

and about the kids' shoes, you gotta do what you gotta do

------------------
88 Notch, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air ,MSD coil, U/L control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best 1/4--> 13.77@101.35

andy669 · 07-23-2001, 09:38 PM

its gonna be tough getting your aode in to the 13's with the stock computer. they have a very low rev limiter and pull tons of timing bewteen shifts. I ran a 2600 convertor with a trans cooler and never had any problems. the hottest i ever saw it get was on a 100 degree day doing 90 through st louis the temp gauge hit 235. i've got a brand new convertor, aode trans. used but excellent shape gauge and cooler!! any takers??...lol....

07-22-2001, 11:01 PM	#1
moponys Registered Member Join Date: May 2001 Location: Antioch, CA 94521 Posts: 181	Can a AODE get into the low 13s? I have a 94 Mustang GT and have been wanting to go to the track for quite a while now. But every time I plan to go, something else comes up (wife/kids etc.) Can someone check out my mods and tell me if it's possible for my AODE to get into the 13s or even low 13s? Please check mods under moponys in users rides. Thanks in advance. ------------------

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
AODE Shift Kit?	scottp	Windsor Power	1	07-30-2003 03:12 PM
Computer for 94 AODE	scottp	Windsor Power	1	07-14-2003 08:19 AM
AODE question/help!	Extremestang	Windsor Power	2	08-21-2002 10:19 PM
Converter for the AODE	St_Brawler	Modular Madness	1	06-21-2000 05:21 PM
Shift Kit 4 the AODE	St_Brawler	Modular Madness	2	05-21-2000 06:41 PM

07-22-2001, 11:18 PM	#2
dinomite The Dude Join Date: Feb 2001 Location: Arlington, VA Posts: 1,262	hmmm, with the AOD, the sn95 weight, and the vert weight.....stock that would be like a mid 15, but you have heads, cam, intake and exhaust. i think you can hit 13s if you drive well. i would suggest that you get hooked up with your local mustang club (or just some friends) and rent out the track, you'll get lots of runs, instead of 2-3 if you go to open track. You know the AOD shuffle?

07-23-2001, 02:18 AM	#3
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	what are your mods ------------------ -1989 Saleen Mustang #406- TFS TW Heads, E-303, Edelbrock intake, 70mm TB, 73mm MAF, 24lb injectors, 1 5/8 shorties, Off Road H, 3 Chamber flows, Jaz Race seats, Back seat removed, sub-frames, Roll Cage, and a 80 shot of N20. 12.54@107.4 Motor 1.69 60'

07-23-2001, 12:09 PM	#4
dinomite The Dude Join Date: Feb 2001 Location: Arlington, VA Posts: 1,262	you can see his mods in users rides. moponys - you should put your mods in your signature, click on "profile" up top

07-23-2001, 12:25 PM	#5
moponys Registered Member Join Date: May 2001 Location: Antioch, CA 94521 Posts: 181	Here you go, I added my mods to my profile... ------------------ TFS twisted wedge heads, TFS street intake, Lunati cam .500/.510 218/226 BBK shorties, BBK 70mm tb, Pro-m 75mm, ASP pulleys, FMS 3:73, Transgo shiftkit Flowmasters, Bassani x-pipe, K&N FIPK, FMS 1.6 roller rockers, 9mm wires,18" wheels w/street tires.

07-23-2001, 05:01 PM	#6
dinomite The Dude Join Date: Feb 2001 Location: Arlington, VA Posts: 1,262	i forgot to say that even if you do get to the 13s, that aod isn't gonna last long with that power....

07-23-2001, 05:10 PM	#7
moponys Registered Member Join Date: May 2001 Location: Antioch, CA 94521 Posts: 181	Would a Precision Industries torque converter help the tranny or hurt it more? Do you think I should get a Lentech tranny when mine gets trashed? Geez this car is a never ending money pit!!!When my kids feet start to grow and they need new shoes, I'm gonna have to modify their old shoes by cutting the fronts off and makine open toed sandals so their feet will fit in just so I'll have enough money for the Stang. Just Kidding...

07-23-2001, 06:27 PM	#8
fiveohpatrol I'd rather be basketweaving Join Date: Feb 2000 Location: Indianapolis Posts: 2,551	the converter will cause more heat in your tranny, which will cause more rapid wear, thats why people suggest a tranny cooler with the installation of the converter, everyone here will tell you to definately go with a lentech, they are supposedly the best, go with the converter and get some good tires and you MAY hit 12's, get the lentech and your there for sure and about the kids' shoes, you gotta do what you gotta do ------------------ 88 Notch, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframe connectors, 65mm TB, shift kit, March ram air ,MSD coil, U/L control arms, 155lph fuel pump, cheap 2800 stall, Crane Adj.FPR, best 1/4--> 13.77@101.35

07-23-2001, 09:38 PM	#9
andy669 Registered Member Join Date: Jan 2001 Location: Moline Il Posts: 901	its gonna be tough getting your aode in to the 13's with the stock computer. they have a very low rev limiter and pull tons of timing bewteen shifts. I ran a 2600 convertor with a trans cooler and never had any problems. the hottest i ever saw it get was on a 100 degree day doing 90 through st louis the temp gauge hit 235. i've got a brand new convertor, aode trans. used but excellent shape gauge and cooler!! any takers??...lol....